19 PTFE Tubing Manufacturers in 2024
This section provides an overview for ptfe tubing as well as their applications and principles. Also, please take a look at the list of 19 ptfe tubing manufacturers and their company rankings. Here are the top-ranked ptfe tubing companies as of April, 2024: 1.NewAge Industries, Inc., 2.Fluoro-Plastics, Inc., 3.M.M. Newman Corporation.
Table of Contents
What Is PTFE Tubing?
PTFE tubing is a tube made of polytetrafluoroethylene, also known as Teflon. It is commonly used to transfer gases and liquids, especially in environments where a clean and chemically inert tubing is required, such as in factory and food lines.
Uses of PTFE Tubing
PTFE tubing is chemical resistant and is used to transfer substances that would corrode materials like glass or other plastics. It is often used in analyzers that handle a variety of chemicals. The tubing's minimal additive content reduces the elution of impurities when pumping liquids. Its excellent non-adhesiveness also reduces the adhesion of dirt and scale, making it a popular choice in food factories and semiconductor manufacturing equipment.
Principle of PTFE Tubing
PTFE is a polymer compound made of carbon and fluorine bonded together. It can be synthesized by polymerizing the monomer TFE (tetrafluoroethylene), which contains many C-F bonds between carbon and fluorine. PTFE tubing is known for its heat resistance, chemical resistance, abrasion resistance, non-adhesiveness, insulating properties, and weather resistance. It is also used in high-temperature locations such as around automobile engines.
Other Information on PTFE Tubing
1. Heat Resistance Temperature of PTFE Tubing
PTFE tubing typically withstands temperatures ranging from -40 to 260°C. However, it's important to note that its breaking pressure value decreases with higher temperatures.
2. Bending Radius of PTFE Tubing
The minimum bending radius of PTFE tubing is related to its inner and outer diameter. For example, tubing with an inner diameter of 1 mm has a minimum bend radius of approximately 5 mm. Care should be taken to not exceed the recommended bending radius to avoid damage.
3. Types of PTFE Tubing Fitting
There are several types of fittings for PTFE tubing, including flare types where a flange is inserted into the end of the tube, and flange types that seal by pressing against the valve port. Fittings for tapered threads are also available, suitable for both straight and elbow connections.
4. How to Use Synapse Assembly Tool
The Synapse assembly tool is used for widening the inner diameter of PTFE tubing. Proper heating and cooling procedures are essential for effective use of this tool. Heating temperatures should be maintained between 280℃ and 380℃ to avoid generating toxic gases.
List of 19 PTFE Tubing Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- China
- Finland
- Germany
- Japan
-
-
-
Fluoro-Plastics, Inc.
extruded tube teflon and ptfe
Manufacturer Overview
Fluoro-Plastics, Inc., founded in 1951, is a manufacturer of fluoropolymer products, with its headquarters also located in Bristol, Pennsylvania. Their extensive product range includes PTFE sheets, films, rods, tubes, and custom-molded parts, as well as PTFE coatings for various substrates. These products exhibit chemical resistance, thermal stability, and electrical properties, and are utilized in industries such as chemical processing, food and beverage, medical, aerospace, and electronics. The company hold ISO 9001:2015 certification for their quality management, and USP Class VI certification.
-
-
-
-
-
NewAge Industries, Inc.
PTFE Tubing
Manufacturer Overview
NewAge Industries began in 1954 as a braid-reinforced, flexible PVC hose company. NewAge Industries is now based in Southampton, Pennsylvania. NewAge Industries’s products are used in fuel and oil, chemical, food and beverage, pharmaceutical, biotechnology, waste handling, water treatment, marine, MRO, packaging mining, energy and nuclear, robotics, computer chip, recreational, and OEM industries. Products include tubing and hose from silicone, polyurethane, PVC, fluoropolymer, nylon, and Viton; barbed, push-to-connect, compression, and cam operated couplings; ear type, nylon double bond, stainless steel worm gear, and plastic pinch clamps, and accessories such as cutters.
-
-
-
-
-
M.M. Newman Corporation
PTFE Tubing
Manufacturer Overview
M.M. Newman Corporation is the world’s leading manufacturer and distributor of Heli-Tube spiral cable wrap, a versatile expandable plastic cable harness available in a wide range of sizes, colors, and materials. Applications for our product range from organizing wires, hoses, and tubing to protecting high-pressure hoses, cables and electrical cords against abrasion, plus so much more.
-
-
-
-
-
Atlantic Rubber Company, Inc
PTFE Tubing
Manufacturer Overview
Atlantic Rubber Company, Inc. is headquartered in Littleton, Massachusetts. The ISO 9001-certified company is a manufacturer of precision rubber and plastic products, serving the industrial, military, pharmaceutical, and commercial markets with application design, advanced manufacturing procedures, and quality control. The company manufactures with most available plastic and rubber compounds including Latex, PVC, Nylon, pure gum, and EPDM. The company’s product line includes rubber tubing, standard and custom rubber O-rings, lab products, rubber grommets, and molded rubber products.
-
-
-
-
-
Daburn Electronics & Cable
PTFE Tubing
Manufacturer Overview
Daburn Electronics & Cable was founded in 1964 and is based in Dover, New Jersey. The company is a supplier of over 500 products including wire, cable, sleeving, vacuum systems, and related products produced in ISO 9001:2008 and AS9100-certified facilities. The company operates through two divisions: Wire & Cable Division and Electronic Hardware Division. The Wire & Cable Division offs military and commercial specification products including wire, cable, tubing, and over 20,000 standard items, mostly available for special construction to order. The Electronic Hardware Division produces in-house porcelain insulators, plugs, fastening devices, cords, and other devices and components.
-
-
-
-
-
Ryan Electronics Corp.
PTFE Tubing
Company Overview
Ryan Electronics Corporation, founded in 1989, is a distributor specializing in electrical wire and cable, wire management accessories, cable assembly solutions, and value-added services. The company is AS9100D and ISO 9001 certified with extensive inventory including a wide range of Mil-Spec and commercial wire and cable. They also supply various accessories such as heat shrink products, braid, sleeving, lacing tapes, and connectors. In addition to traditional services, they provide cable design and manufacturing capabilities, as well as customized assembly solutions. They serve a diverse range of industries, including aerospace, defense, communications, electronics, and more.
-
-
-
-
-
Industrial Specialties Mfg., Inc.
PTFE Tubing
Company Overview
Industrial Specialties Manufacturing (ISM) was founded in 1982 in Denver Colorado. is an ISO 9001 company that supplies miniature pneumatic, vacuum, and fluid circuitry components to OEMs and distributors all over the world as well as providing custom solutions. The company serves distributors and offers not just sales but also marketing and logistics support with closed-loop feedback. Some of the types of products ISM offers include plastic fittings, customized fittings, sub-assemblies, and custom heat seal tooling.
-
-
-
-
-
Queen City Polymers
PTFE Tubing
Company Overview
Queen City Polymers is a company based in West Chester, United States, established in 1980, specializing in the manufacturing and supply of polymer-based products. Their product portfolio includes custom polymer compounds, molded parts, extruded profiles, and polymer seals, among others. These products are essential components in numerous applications, from automotive and aerospace to electronics and construction. Queen City Polymers' offerings are known for their durability, versatility, and quality, making them a preferred choice for customers seeking dependable polymer solutions. The company has established itself as a principal partner in the United States and beyond
-
-
-
-
-
Liquidyne Process Technologies, Inc.
PTFE Tubing
Distributor Overview
Founded in 1993, Liquidyne Process Technologies serves the dairy, brewery, distillery, biotech, pharmaceutical, & cannabis industries. Liquidyne offers a full line of sanitary and single-use products including process equipment components, sanitary equipment, single-use pumps and valves, single-use fittings and connectors, custom single-use assemblies, sanitary hose assemblies, sanitary valves, and single-use bioprocessing systems. Liquedyne produces all equipment in an ISO14644 Class 7-certified cleanroom has also attained 9001:2015, USP Class VI Testing, ASME Bioprocessing Equipment, and EHEDG certification status. Liquedyne also offers process optimization and on-site process audit & evaluation services.
-
-
-
-
-
Stranco Products
PTFE Tubing
Distributor Overview
Stranco Products was established in 1944 and is a distributor of heat-shrinkable tubing and electrical insulation. Molded components, wires & cables, identifying goods, and connection devices are available to service the automotive, commercial electronics & communications, recreational vehicles, space satellites, and defense industries. The Bolingbrook, Illinois-based, ISO 9000 and QS-9000 certified company sells non-heat shrink tubings, including PVC, fiberglass sleeving, expandable sleeving, and slit corrugated conduit tubings; the heat shrink tubings, including single-wall, dual-wall, heavy-duty, Polyolefin, and special-purpose heat shrinks.
-
-
-
-
-
ElringKlinger Kunststofftechnik GmbH
PTFE-Tubes
Manufacturer Overview
ElringKlinger Kunststofftechnik GmbH, established in 1971 and located in Bietigheim-Bissingen, Germany, is a manufacturer of optimal-performance engineered plastics. The company offers a broad range of products, including gaskets, PTFE materials, seals, shielding components, and custom-engineered plastic parts. It holds quality certifications like ISO 9001 and IATF 16949 for meeting stringent quality standards. Its engineered plastics are used in industries for robust mechanical properties, chemical resistance, and thermal stability, making them ideal for applications in the automotive, aerospace, industrial, and energy sectors.
-
-
-
-
-
VOLSUN
PTFE Tubing
Manufacturer Overview
Suzhou Volsun Electronics Technology Co. Ltd., established in 2006 and headquartered in Suzhou, China, is a developer, manufacturer, and supplier of SGS-RoHS-compliant insulation solutions. The company manufactures over 2,500 products that include silicone self-fusing tapes, dual-wall heat shrinking tapes, and braided fiberglass sleeves. The company works with materials that include fluoro-plastics, fluoro-rubbers, and teflon. These products are used for insulation, sealing, and identification applications ranging from hand-held electronic devices and electric appliances to aerospace and rail transit systems.
-
-
-
-
-
SMC Corporation.
PTFE Tubing
Manufacturer Overview
SMC corporation was founded in 1959 and is headquartered in Tokyo, Japan. SMC Corporation manufactures and sells automatic control equipment and filtration equipment. SMC has production facilities in 30 countries, technical development centers in Japan, the United States, Europe, and China, and sales offices, globally. SMC product lines divided by them include filter replacements, condensation prevention, heat resistance, thermos-chilling, and others. SMC provides a video library as well as product selection guide to assist customers in finding solutions and optimizing product efficiency.
-
-
-
-
-
Optinova Americas, Inc.
PTFE Tubing
Manufacturer Overview
Optinova Americas, Inc. (OA) is a manufacturer specializing in tubing solutions for medical and industrial use. The company was established in 2001 as a subsidiary of the Finnish company Optinova Group. Located in Plymouth Meeting, Pennsylvania, the company produces various types of tubing for the medical and industrial sectors such as specialized lead tubing for medical implants, wire insulation, and monofilaments in a wide range of materials, sizes, and profiles. OA also offers secondary prototyping services, as well as performance enhancing processes such as tip forming, flaring, pressure testing, and etching.
-
-
-
-
-
Pore Technology, Inc.
PTFE Tubing
-
-
-
-
-
Ningbo Sunwell Sealing Materials Co., Ltd
PTFE TUBING
Company Overview
Ningbo Sunwell Sealing Materials Co., Ltd, established in 2010 and based in Zhejiang, China, is a manufacturer and supplier of gaskets and sealing products. The company's product portfolio includes spiral wound gaskets, testing equipment, and glass fibers. These products find applications in various industries, including renewable energy, manufacturing, and the food and beverage industry. The company is ISO 9001:2015, ISO 14000, and ISO 18000 certified, with a global network that spans various countries, including the United States.
-
-
-
-
-
Lapp Tannehill
Extruded PTFE Lightweight Wall Tubing - Natural
Company Overview
Lapp Tannehill, established in 1955, and headquartered in Savage, Minnesota, is a supplier and distributor providing wire, cable, and connectivity solutions. Their product range includes cables, wires, connectors, and accessories for industries such as automotive, aerospace, oil and gas, and renewable energy. Lapp Tannehill's products are designed to deliver electrical connections, data transmission, and signal integrity, they ensure efficient power distribution, communication, and control in various industrial applications. Lapp Tannehill maintains standards and works with reputable manufacturers to provide solutions to their customers.
-
-
-
-
-
Sun Platec
PTFE Tube
Company Overview
Sun Platec is an ISO 9001-certified manufacturer and distributor of laboratory equipment and supplies that was established in Osaka, Japan, in 1960. The company offers laboratory equipment such as tubes and pipettes, and laboratory supplies such as wipes and tips. It also offers various containers including flasks and bottles, and polytetrafluoroethylene (PTFE) beakers and crucibles. The company’s products are commonly used in Asia’s educational and research institutions. Its clients include companies in the biotech, pharmaceutical, and food processing industries.
-
-
-
-
-
Dechengwang
PTFE Tubes
-
-
PTFE Tubing Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | NewAge Industries, Inc. |
10.1%
|
| 2 | Fluoro-Plastics, Inc. |
9.5%
|
| 3 | M.M. Newman Corporation |
8.8%
|
| 4 | Industrial Specialties Mfg., Inc. |
7.4%
|
| 5 | Atlantic Rubber Company, Inc |
7.4%
|
| 6 | ElringKlinger Kunststofftechnik GmbH |
6.1%
|
| 7 | Queen City Polymers |
6.1%
|
| 8 | VOLSUN |
4.7%
|
| 9 | Pore Technology, Inc. |
4.7%
|
| 10 | Ningbo Sunwell Sealing Materials Co., Ltd |
4.1%
|
Derivation Method
The ranking is calculated based on the click share within the ptfe tubing page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- M.M. Newman Corporation: 12
Newly Established Company
- Ningbo Sunwell Sealing Materials Co., Ltd: 2010 (14 years ago)
- VOLSUN: 2006 (18 years ago)
- Dechengwang: 2006 (18 years ago)
Company with a History
- M.M. Newman Corporation: 1956 (68 years ago)
- SMC Corporation.: 1959 (65 years ago)
- Optinova Americas, Inc.: 1971 (53 years ago)
PTFE Tubing Manufacturers in United States
*Including some distributors, etc.
- Fluoro-Plastics, Inc.
- NewAge Industries, Inc.
- M.M. Newman Corporation
- Atlantic Rubber Company, Inc
- Daburn Electronics & Cable
- Ryan Electronics Corp.
- Industrial Specialties Mfg., Inc.
- Queen City Polymers
- Liquidyne Process Technologies, Inc.
- Stranco Products
Global Distribution of PTFE Tubing Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
10 | 66.7% |
China
|
2 | 13.3% |
Germany
|
1 | 6.7% |
Japan
|
1 | 6.7% |
Finland
|
1 | 6.7% |
List of PTFE Tubing Products
8 products are listed.
Aritosukai Co., Ltd.
Metal, rubber, resin handling tube
10+ people viewing
In the Yunshi Shokai, there is a handling of tubes. We have a track record of handling both manufacturer standard products and ordered products. It...
Denka Electron
Ribbon tube
50+ people viewing
A special PVC tube with an elliptical natural shape is compatible with a single size of a single size, which leads to reduced management costs. Si...
