37 Blasting Machinery Manufacturers in 2024
This section provides an overview for blasting machinery as well as their applications and principles. Also, please take a look at the list of 37 blasting machinery manufacturers and their company rankings. Here are the top-ranked blasting machinery companies as of April, 2024: 1.Viking Corporation, 2.CMV, 3.Suzhou Lanzhixing Electromechanical Equipment Co., Ltd..
Table of Contents
What Is Blasting Machinery?
Blasting machinery is machinery that alters the surface condition and composition of a material by propelling an abrasive at high pressure and high speed.
There are different types of blasters, such as sandblasting and alumina blasting, depending on the type of abrasive used, and air blasting and shot blasting, depending on the structure of the jetting.
This technology is indispensable in today's industry and has a wide range of applications, including processing automobile and airplane parts, strengthening buildings, and pre-treatment for semiconductor bonding.
Uses of Blasting Machinery
There are three main applications for blasting machinery:
- Improvement of Surface Roughness
Specific applications include non-slip treatment and undercoating of paints.
- Improvement of Rigidity
Specific applications include strength enhancement of passenger aircraft bodies and cannonballs in athletics.
- Improvement of Material Surface Cleanliness
Specific applications include rust removal, deburring after cutting, and removal of oxide film, among others.
Principle of Blasting Machinery
A powdery substance is injected at high speed using compressed air produced by a compressor or by an impeller connected to a motor to create an uneven surface on metal, resin, etc. This machine is used to create an uneven surface. Machines that use compressed air are classified as air blasting, while those that use an impeller are classified as shot blasting.
These machines come in various sizes, from large machines that can occupy an entire room to small ones that can fit into a small booth. Shot blasting can also be combined with robots to perform unmanned blasting, or with nozzles that simultaneously suction the sprayed abrasive.
Various surface conditions can be achieved depending on the type of abrasive, the strength of the spray, the nozzle used to inject the abrasive, and the distance from the nozzle to achieve a variety of effects.
Common Abrasive Types:
- Alumina
- Sand, Stone
- Zinc grain
- Iron
Spraying abrasives can slightly grind or abrade the surface of an object.
Spraying an abrasive with an angular shape can create an uneven surface, enhancing friction. This can be applied to prevent slipping on floor treads or to improve paint adhesion, reducing the risk of peeling.
Spherical abrasives can also be sprayed and tapped on the surface to strengthen the metal, akin to forging a blade. This can increase the hardness of the blasted metal, even if it is the same type of metal.
Alternatively, by spraying a fragile abrasive at a relatively low speed, the surface can be cleaned with minimal change in surface roughness. This method is used to remove rust from oxidized surfaces, expose active surfaces, and deburr after cutting.
List of 37 Blasting Machinery Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- China
- Germany
- Japan
- United Kingdom
-
-
-
Viking Corporation
SHOT BLASTING MACHINERY
Manufacturer Overview
Viking Corporation, founded in the year based in Kansas, United States, is a manufacturer and supplier of industrial cleaning equipment. The product portfolio includes short blast machines, industrial washers, vibrating equipment, industrial dust-collecting equipment, stock machines, and other cleaning solutions. The products are used in foundry, forge, structural and plate, propane, and welding industries. The company also offers repair and rebuild services with tailor-fit customized solutions under the guidance of professional engineers.
-
-
-
-
-
Pellets, LLC
Blasting Machinery
Manufacturer Overview
Pellets, LLC is a manufacturer and supplier of wood pellets for heating and cooking and the company is based in Tonawanda, New York, United States, and was established in 1948. Pellets, LLC offers a range of products, such as premium hardwood pellets, softwood pellets, blended pellets, and flavored pellets. The products are crucial components in various systems, such as pellet stoves, furnaces, boilers, and grills. The products are used for various purposes, such as providing clean and efficient heat, reducing carbon footprint, and enhancing flavor of food. Pellets, LLC is devoted to customer satisfaction and quality standards.
-
-
-
-
-
Composition Materials Co., Inc.
Blasting Machinery
Manufacturer Overview
Composition Materials Co., Inc., founded in 1923 and located in Milford, Connecticut, is a supplier and manufacturer of abrasives, fillers, extenders, blast media, and all-natural exfoliation ingredients. The company’s broad range of products includes plastic media, biofilters, recycled fillers, cosmetics, and abrasive blasting. These products find specific applications in industries such as surface finishing, cleaning, surface preparation, cosmetics, and environmental solutions. Composition Materials Co., Inc.'s offerings play essential roles in enhancing surfaces, improving material properties, facilitating cleaning processes, and being used in an array of industrial and commercial applications.
-
-
-
-
-
DAES Group
Blasting Machinery
Manufacturer Overview
DAES Group was founded in 1994 and operates out of Arlington, Texas. DAES is a service provider of aerospace and related components, serving commercial airlines, military, and MRO operations globally. DAES product list includes products used to provide engine tooling, heat treatment, landing gear construction, thermal spraying, and other components and functions. DAES services include both management and material support. Management support includes project management, consulting, training, technical assistance, and operations management. Material support includes installation, testing, maintenance, component repair, and facilities improvement.
-
-
-
-
-
CRW Finishing, Inc.
Blasting Machinery
Manufacturer Overview
CRW Finishing, Inc. was founded in 1977 and is located in Addison, Illinois is a manufacturer and trader of metal finishing equipment. The company offers an array of products including wastewater treatment system supplies, centrifugal disk finishing equipment, and abrasive belt and buffing equipment. It extends services like surface refinement, decorative finishing, and tube polishing. These products find applications in sewage and water treatment plants, welding and woodwork facilities, and manufacturing of automobiles.
-
-
-
-
-
SAE Manufacturing Specialties Corp
Blasting Machinery
Manufacturer Overview
Based in Bayville, NY, SAE Manufacturing Specialties Corp. is an ISO-certified supplier and manufacturer of industrial equipment, chemicals, components, ordinance, electronics, and systems for industries ranging from aerospace to high tech to law enforcement. Examples of product offerings include raw materials, chemicals, and lubricants for industrial purposes to finished products such as security helmets for law enforcement, and military ordnances. SAE also provides research and development as well as technical support for other companies in similar industries.
-
-
-
-
-
Empire Abrasive Equipment Co.
Blasting Machinery
Company Overview
Empire Abrasive Equipment Co. has been a manufacturer of air-blast equipment since 1943, with a product portfolio that includes Robotic & Automated Blast Systems, Modified & Manual Blast Cabinets, Portable Blast Systems, and Dust Collectors for the transportation, energy, technology, and consumer manufacturing markets. The Langhorne, PA-based company backs up its products with technical support, training, lab testing, turnkey installation, and close global distributor network assistance. The company is a Kuka Official System Partner, Fanuc Authorized Integrator, ABB Robotics Authorized Partner, and Robotmaster CAD/CAM software integrator.
-
-
-
-
-
Dawson-Macdonald Co., Inc.
Blasting Machinery
Distributor Overview
Dawson-Macdonald Co., Inc. was founded in 1928 and is headquartered in Wilmington, Massachusetts. Dawson-Macdonald is a developer and producer of production manufacturing equipment, systems, and supplies for surface preparation.Dawson-Macdonald’s product offerings include air filtration equipment, abrasives, air blast equipment, shot blast equipment, wet blast equipment, wheel blast equipment, and vacuum systems. Dawson-Macdonald also offers rental options as well as preventative maintenance, service, and repair both in house or in the field.
-
-
-
-
-
Hildebrand Machinery Co., Inc.
Blasting Machinery
Distributor Overview
Hildebrand Machine Company, Inc was founded in 19773 and operates out of York, Pennsylvania. Hildebrand Machine Company is a distributor and trader of new and used metalworking machinery in machine/equipment and tooling categories. Air compressors, balancers, blast cabinets, lathe chucks, coolant tanks, drill presses, arm drills, dust collectors, polishing machines, engine lathes, and rotary tables are among the machinery listings. Tooling includes angle plates, boring tools, broaching, counterbores, grinder tooling, punch and dies, tapping, tool holders, and vises.
-
-
-
-
-
Marcuse & Son, Inc.
Blasting Machinery
Distributor Overview
Marcuse & Son was established in 1925 and operates out of Fort Worth, Texas. Marcuse & Son is a distributor of air compressors and air compressor parts and accessories. Air compressor offerings include reciprocating air compressors and rotary style air compressors. Marcuse & Son’s accessories include air receivers, alternators, belt guards, block heaters, brass valves and fittings, breather vents, compressor lubricants, exhaust mufflers, filters, regulators & lubes, refrigerated air dryers, and water separators.
-
-
-
-
-
N.T. Ruddock Co.
Blasting Machinery
Distributor Overview
N.T. Ruddock Company was founded in 1951 and is located in Cleveland, Ohio. N. T. Ruddock is ISO 9001:2015 registered and is a distributor off industrial equipment. Product lines include blast cleaning abrasives, equipment and replacement parts, primary and secondary aluminum ingot, aluminum and copper master alloys, and pure metals. Abrasive options include glass beads, corn cob, crushed glass, steel shot, copper slag, and more. Metal options include aluminum alloys, aluminum master alloys, copper master alloys, ferro alloys, alloy additions, and beryllium alloys. Additionally, N.T. Ruddock also sells many types of parts such as nozzles, guns, and valves, in addition to larger equipment such as blast cabinets and blast pots. NT. Ruddock offers installation, cleaning, repair, custom bagging, and in-house blending of abrasives, and repair.
-
-
-
-
-
Unified Technologies
Blasting Machinery
Distributor Overview
Midwest Fasteners, Inc. established in Miamisburg, Ohio, is a supplier of shot blasting equipment, dust collection systems, parts washers, and pneumatic conveying systems. Their product portfolio includes Airless Centrifugal Blasting, Posi-flate, Washers, Blast Media, Nu-Soft Blast Media and Solvent Recyclers as well as posi-flate butterfly valves for optimizing the manufacturing process, and are used in industries such as construction, textiles, automotive and chemical industry. The company has customer service and a national distribution channel.
-
-
-
-
-
NICCHU Co., Ltd.
PRODUCT INFORMATION
Manufacturer Overview
Nicchu CO., Ltd, established in 1959 and based in Tokyo, Japan, is a manufacturer and supplier of surface processing equipment. The company's product range includes portable abrasive blasting machines, blast cabinets, shot peening machines, and dust collectors. These products play a pivotal role in surface treatment, cleaning, and enhancing material properties. They serve sectors like automotive, construction, electronics, and shipbuilding. Beyond equipment manufacturing, the company offers machinery maintenance, equipment rental, and technical support to its customers.
-
-
-
-
-
Suzhou Lanzhixing Electromechanical Equipment Co., Ltd.
Roller type shot blasting machine
Manufacturer Overview
Suzhou Lanzhixing Electromechanical Equipment Co. Ltd. has been a manufacturer of electromechanical equipment since 1983 and is based in China. The company provides steel pretreatment production lines which are composed of a conveying system, preheating device, shot blasting cleaning, painting, drying system, and more along with Environmental protection three waste treatment projects for wet, dry, and pulse dust collecting. There are also shot blasting and laser cutting platforms and sandblasting rooms to benefit the shipbuilding, locomotive, automobile, elevator, and chemical industries.
-
-
-
-
Manufacturer Overview
QGMA Group has been a manufacturer of shot blasting machines and sandblasting rooms since 1975 based in China. The company provides roller conveyor shot blasting machines used to clean and pretreat metal workpieces along with sandblasting rooms, spray paint booths, shot peening machines, preservation lines, and spare parts for applications such as pretreatment of materials for electroplating, painting, spraying, etc. and for cleaning casting parts, stamping parts, and welding parts for use in automobile, aerospace, and mold processing industries.
-
-
-
-
-
JX BlastJX Shot Blasting Machine Co., Ltd.
Roller Conveyor Shot Blast Machine
Manufacturer Overview
JX Blast is a manufacturer of shot-blasting machines based in China. The company provides blasting solutions and surface preparation with Roller Conveyor, Wire Mesh Belt Conveyors, Hook Type, Concrete Block, and Rotary Table Shot Blast Machine which are available in various sizes, and upgraded transport technology. There are also Shot Blasting Chambers and together this equipment is acquired by the Automobile, Energy & Power, Stone Texturing, Casting Industries, and Dust & Air Pollution Control Systems to name a few.
-
-
-
-
-
Yancheng Dafeng Sanxing Machinery Co., Ltd,
Shot Blasting Machine
Manufacturer Overview
Kholee Blast, Kholee Industrial Technology Yancheng Co. Ltd is known as a manufacturer and supplier of blasting equipment and accessories based in China. The company provides the various machines and tools required for surface finishing which includes shot and sandblasting machines, painting booths and their production line, Vacuum Recovery machines, Air air-cooled dehumidifiers, dust collectors, etc. The company is also known for distributing airless paint sprayers, air compressors, and UHP water jetting and these products are used in industries of oil and gas tanks, earthwork construction machinery, castings, shipyards, engineering and heat treatment, etc.
-
-
-
-
Manufacturer Overview
BlastKing was established in 1982, in China as a manufacturer and supplier of air blast and wheel blast solutions. The company designs and provides shot blast, shot-peening, and foundry equipment which includes machines like floor shot blasters, scarifiers, and grinders for preparing concrete and steel surfaces, wheelblast equipment is available in the form of blasting turbines, blasting chambers, blasting media recovery system, dust collector system and workpieces handling conveyor system. There are also air blast and wet blast equipment having extensive applications in structural steelworks, marble and cement, painting preparation, Aluminum diecasting, and Brass forging to name a few.
-
-
-
-
-
GeneralCoat Technologies Ltd.
Shot Blasting Machine
Manufacturer Overview
GeneralCoat, a manufacturer situated in Wenzhou, China, strategically positions itself just 500km away from the Shanghai port. The company specializes in cutting-edge powder coating equipment. With state-of-the-art facilities, it serves global industries by providing not only equipment and materials but also fostering enduring technological partnerships for mutual growth.The company's team are geared towards pioneering surface finishing solutions.Known for quality and cost-effectiveness, its offerings gain acclaim worldwide. Inquiries are welcome, and OEM collaboration is encouraged, with every plant installation is a tailored turnkey project, reflecting clients' specifications.
-
-
-
-
-
QINGDAO QINGGONG MACHINERY CO., LTD.
Shot Blasting Machine
Manufacturer Overview
QINGGONG Machinery is a manufacturer and supplier of automatic shot blasting machines, based in China and established in 1975. The company provides shot blasting machines that remove surface contaminants, and clean and roughen a smooth surface before applying a coating, along with Industrial sandblasting room equipment which is required for surface preparation with spare parts abrasives, CNC Turrent Punching machines, and Roller conveyor shot blasting machines that remove all forms of rust and corrosion from metallic materials. These machines are used in aerospace, automotive, construction, foundry, shipbuilding, and rail industries.
-
-
-
-
-
SCHWING Technologies GmbH
Blasting Machinery
Manufacturer Overview
SCHWING Technologies, founded in Neukirchen-Vluyn, NRW, in 1969 is a manufacturer of thermal cleaning technologies for the removal of polymers and organic contaminations from metal tools and machine parts. The company's product portfolio includes the (thermal) cleaning of metal parts and tools, thermo-chemical gas-solids reactions in variable atmospheres up to 1100 °C, especially efficient heat treatment of metals and calibration of temperature sensors and thermal instruments. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation.
-
-
-
-
-
Proge-Tec Srl
Brushing
Manufacturer Overview
ProgeGroup, founded in 1999, is a group of Italian manufacturers (Proge-Tec S.r.l. and P. Technologies S.r.l.) headquartered in Galgagnano, Lodi, specializing in metal processing solutions. Initially producing automatic and semiautomatic riveting machines, the company expanded its product range for applications like packaging and molding. It also designs fully automated machines for lathing and welding specifically for the cookware industry. The company further provides industrial coating and washing solutions, as well as steel and aluminum disc blanking lines and palletizing systems.
-
-
-
-
-
CYM MATERIALES S.A.
SHOT BLASTING MACHINES
Manufacturer Overview
Cym Materials S.A., founded in 1960, is an Argentina-based manufacturer headquartered in Soldini, Santa Fe, engaging in the metallurgical industry. The company, certified with ISO 9001, ISO 14001, and ISO 45001, provides standard and custom shot blasting machines. It also produces a line of sandblasting, wheel blasting, and shot blasting cleaning equipment. Spare parts and accessories are also available for compressed air projection and blasting centrifugal equipment. Other products include dust collectors and abrasives, such as spherical and angular carbon steel shots, glass microspheres, and aluminum oxides.
-
-
-
-
-
Guangdong Jingzhongjing Industrial Painting Equipment Co., Ltd.
Shot Blasting Machine
Manufacturer Overview
Guangdong Jingzhongjing Industrial Painting Equipment Co. Ltd is based in Guangzhou, Guangdong, China, and is a manufacturer of painting and environmental production equipment established in 1999 before its acquisition by Jingzhongjing Group Co. Ltd. The company offers shot and sandblasting rooms for surface preparation and cleaning, powder coating lines for electrostatic spraying, and spray booths for vehicles, including cars and buses. It also offers foldable field camping cabins and exhaust gas treatment equipment. The company’s products are used in the rail, automotive, and aerospace industries.
-
-
-
-
Manufacturer Overview
CMV®, established in 1973 and based in Cachoeirinha, Brazil, is a manufacturer and supplier specializing in the production of blasting machines. The company's range of blasting machines includes airblast machines, wheelblast machines, shot peening machines, blast wheels, and dust and welding fume extractors. These blasting machines have found successful global applications, including in the manufacturing industry, automotive industry, aerospace industry, construction industry, and other industries. The company also operates under the Blastibrás® brand, which it acquired in 1997. The company is ISO 9001:2015 certified and has locations in Brazil, Hong Kong, the United States, and Russia.
-
-
-
-
VIXEN Surface Treatments
Wet Blasting Machines
Company Overview
VIXEN Surface Treatments is a manufacturer and supplier of wet blast cleaning and surface treatment products that was established in Stockton-On-Tees, United Kingdom, in 1990. The company’s product lineup includes aqueous degreasing machines for removing contaminants from metal surfaces, wet blasting machines for slurring applications, and phosphating machines for conversion coating of metal or iron parts. The company’s products are commonly used by its clients in the aerospace, additive manufacturing, and automotive industries.
-
-
-
-
-
Walther Trowal GmbH & Co.
THM CONTINUOUS BELT BLASTING UNIT
Company Overview
Walther Trowal GmbH & Co. established in 1931 and based in Germany, is a manufacturer and supplier of machines and system solutions in surface finishing technology. The company's product range includes mass finishing systems, shot blasting equipment, coating technologies, and wastewater service systems. These products are critical for a multitude of applications such as polishing, deburring, smoothing, cleaning, shot peening, de-rusting, and cutlery cleaning. Serving industries that prioritize machinery manufacturing, surface finishing, and equipment servicing and maintenance, the company provides services like retrofitting, process trials, equipment servicing and maintenance, and extensive engineering support.
-
-
-
-
-
Ningbo Dino-Power Machinery Co., Ltd.
Blasting Machinery
Company Overview
Ningbo Dino-Power Machinery Co. LTD (Dino-Power) is based in China with representative distributors available internationally. Dino-Power is both in-house and OEM producer for airless paint sprayer products. Dino-Power’s product line includes airless paint sprayers, other spraying equipment, and spare parts and accessories. Airless paint sprayers include piston and diaphragm pump designs, gas powered, airmix, and pneumatic sprayers, airless line marking machines and two component paint spray machines. Other equipment includes texture sprayers, stucco sprayers, hopper sprayers, and more.
-
-
-
-
-
Wuxi Canon Inteligent Equipment Technology Co., Ltd
Shot Blasting Machine
Company Overview
Wuxi Canon Intelligent Equipment Technology Co. Ltd., established in 2008, is a Chinese manufacturer and supplier based in Wuxi, Jiangsu, producing hydraulic machine tools. The company specializes in production solutions, specifically for steel cylinder manufacturers. Its product range includes machinery for air tanks, such as hydraulic presses, rolling machines, and trimming machines. It also produces machinery for liquid petroleum gas (LPG) cylinders, such as halve embossing and flange punching presses, foot ring welding machines, and shroud welding machines. The company serves international clientele in Africa, Southeast Asia, and the Middle East.
-
-
-
-
-
Wharton Hardware and Supply
Blasting Machinery
Company Overview
Wharton Hardware and Supply is a family-operated business that was founded in 1948 in Philadelphia, Pennsylvania and has branched to several locations across the United States. Wharton operates in 3 segments: products, sales & rental, and services. The products segment includes road & bridge concrete accessories, safety equipment, abrasives and cutting tool products, plumbing-related products, topological products, fasteners, bits and drill equipment, as well as power tools. The sales & rental segment offers heavy duty construction equipment from major brands. The services segment includes repair and testing for tools and equipment.
-
-
-
-
-
Sterling Machinery Exchange
Blasting Machinery
Company Overview
Sterling Machinery Exchange (Sterling) was founded in 1954 and is based in South El Monte, California. Sterling is a distributor for new and used machinery and purchases used equipment, primarily for industrial and manufacturing uses. Types of machinery the company offers include air compressors, boring mills, deburring machines, lathes, and stretch forming machines. The company offers both new and used equipment as well as a buyer's guide for purchasing assistance. The company also purchases used equipment.
-
-
-
-
-
Vapormatt Ltd.
Manual Machines
-
-
-
-
-
Turbotecnica SpA
Overhead Conveyor Blast Machines
-
-
-
-
-
-
FerroČrtalič d.o.o.
Automated blasting
-
-
-
-
-
DX-BLAST CO., LTD.
Blasting Machine
-
-
-
-
-
Midvale Industries, Inc
Blasting Machinery
Distributor Overview
Midvale Industries was founded in 1901 in East Saint Louis, Illinois. Midvale Industries sells its mined and manufactured products. Midvale Industries provides process solutions for many industrial applications, including Aerospace, Metalcasting, Metal Finishing, Parts Washing, and Industrial Coating. The company is a nationwide distributor serving customers' projects such as coating removal on composites in the aerospace industry and consulting on the production of castings. Beyond sales, Midvale Industries shows customers how to use products and equipment safely and efficiently.
-
-
Blasting Machinery Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Viking Corporation |
11.8%
|
| 2 | CMV |
5.9%
|
| 3 | Suzhou Lanzhixing Electromechanical Equipment Co., Ltd. |
5.9%
|
| 4 | JX BlastJX Shot Blasting Machine Co., Ltd. |
5.9%
|
| 5 | BlastKing |
5.9%
|
| 6 | GeneralCoat Technologies Ltd. |
5.9%
|
| 7 | Pellets, LLC |
5.9%
|
| 8 | Sterling Machinery Exchange |
5.9%
|
| 9 | CRW Finishing, Inc. |
5.9%
|
| 10 | Midvale Industries, Inc |
5.9%
|
Derivation Method
The ranking is calculated based on the click share within the blasting machinery page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- QINGDAO QINGGONG MACHINERY CO., LTD.: 150
- NICCHU Co., Ltd.: 110
Newly Established Company
- Proge-Tec Srl: 1999 (25 years ago)
- DAES Group: 1994 (30 years ago)
- VIXEN Surface Treatments: 1990 (34 years ago)
Company with a History
- Composition Materials Co., Inc.: 1923 (101 years ago)
- Marcuse & Son, Inc.: 1925 (99 years ago)
- Walther Trowal GmbH & Co.: 1931 (93 years ago)
Blasting Machinery Manufacturers in United States
*Including some distributors, etc.
- Viking Corporation
- Pellets, LLC
- Composition Materials Co., Inc.
- DAES Group
- CRW Finishing, Inc.
- SAE Manufacturing Specialties Corp
- Empire Abrasive Equipment Co.
- Dawson-Macdonald Co., Inc.
- Hildebrand Machinery Co., Inc.
- Marcuse & Son, Inc.
- N.T. Ruddock Co.
- Unified Technologies
Global Distribution of Blasting Machinery Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
12 | 50.0% |
China
|
8 | 33.3% |
Germany
|
2 | 8.3% |
Japan
|
1 | 4.2% |
United Kingdom
|
1 | 4.2% |
List of Blasting Machinery Products
9 products are listed.
Izumiya Machinery Co., Ltd.
STC type low -pressure blower blast Automatic / humanization system fully automatic low -pressure blower blast
STC low -pressure blasting technology with 25 years of experience Included transmitted devices and transportation devices, polishing devices, clean...
Sanoyas engineering Co., Ltd.
The definitive jig stripper (whist type) of the painted peeling machine that is friendly to people and the environment
■ The definitive jig stripper of the painted peeling machine that is friendly to people and the environment The jig stripper can play paint attache...
Sanoyas engineering Co., Ltd.
The definitive jig stripper (for accessory jigs) of the paint peeling machine that is friendly to people and the environment
■ It is a very useful machine for accessories. Set a small paint jig on a machine when performing paint peeling processing (hooked on a hanger) can...
Sanoyas engineering Co., Ltd.
Determined jig stripper (standard type) of the determined version of the paint peeling machine that is friendly to people and the environment
■ The definitive jig stripper of the painted peeling machine that is friendly to people and the environment The jig stripper can play paint attache...
