137 Inline Check Valve Manufacturers in 2024
This section provides an overview for inline check valves as well as their applications and principles. Also, please take a look at the list of 137 inline check valve manufacturers and their company rankings. Here are the top-ranked inline check valve companies as of April, 2024: 1.Harwood Engineering Co., Inc., 2.TSI Flow Products, 3.Ningbo Doway M&E Co.,Ltd.
Table of Contents
What Is an Inline Check Valve?
An inline check valve is a valve that is inserted inside a pipe to prevent backflow. When fluid at a pressure greater than or equal to the preset pressure reaches the inline check valve in relation to the direction of flow of the inline check valve, the valve opens, and the fluid flows. In the case of reverse flow or fluid flow below the preset pressure, the valve will not open, and the fluid will not flow. Many products are characterized by the fact that they do not require external momentum, such as electric power, and operate solely on the internal mechanism.
Uses of Inline Check Valves
Inline check valves are used in various applications, including chemical and petroleum plant factories, machine tools that use lubricants and abrasives, household products, and public institutions such as waterworks and water treatment plants. When selecting an inline check valve, it is necessary to consider such factors as the set pressure to allow the fluid to pass through the valve's inside diameter, the magnitude of the fluid loss coefficient, construction, allowable flow and pressure, vibration, and ease of maintenance. It is also necessary to consider whether the material is compatible with the type of fluid used.
Principles of Inline Check Valves
The following explains the principle of operation of an inline check valve. Inline check valves consist of a seat affixed to the side of the piping to provide thickness. This component is called a poppet that normally inhibits flow and, under certain conditions, allows flow through a spring to keep the poppet in contact with the seat by applying force in a direction that keeps it in contact with the seat, and a seat affixed to the side of the piping to hold that spring in place. The seat is used to hold the poppet in place.
While the inline check valve is operating, if a pressure more significant than the force exerted by the spring in the flow direction is applied by the fluid, the spring is pushed together with the poppet, allowing the fluid to flow through the inline check valve. The poppet will not open unless the flow applies a pressure greater than the force exerted by the spring. If flow occurs in the reverse direction, the poppet is pushed by the flow in the direction of the seat, so the higher the pressure exerted on the poppet by the flow, the more it will inhibit the flow.
List of 137 Inline Check Valve Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Canada
- China
- Germany
- India
- Japan
- Singapore
- Switzerland
- Taiwan
- United Kingdom
-
-
-
Harwood Engineering Co., Inc.
IN-LINE CHECK VALVES
Manufacturer Overview
Harwood Engineering Co., Inc. is a developer and manufacturer of pressure systems and related components established in 1947 and headquartered in Walpole, Massachusetts, USA. The company offers pressure transducers and vessels for measurement or containment applications, hydraulic intensifiers for generating pressure in process gasses or liquids. It also offers pressure calibration equipment for ensuring accurate pressure measurement and operation of its portfolio products. The company’s products are mainly used by clients in the chemical, petroleum, and energy industries.
-
-
-
-
-
Flomatic(R) Corporation
Stainless Steel Valves
Manufacturer Overview
Flomatic(R) Corporation, founded in Glens Falls, NY, in 1933 is a manufacturer of valves for the water and wastewater industry. The company's product portfolio includes Backflow Preventers, Break Off Plugs, Butterfly Valves, Check Valves and Constant Pressure Pump Control Valves. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company also offers services including test and measuring the coating thickness of fusion bonded epoxy coat paint systems to ensure superior abrasion and corrosion resistance for longevity and verification organizations and labs to ensure safety.
-
-
-
-
-
Warren Valve
INDUSTRIAL CHECK VALVES
Manufacturer Overview
Warren Valve, established in 2000, is headquartered in New Jersey, USA, and operates as a manufacturer and supplier specializing in industrial valves. Their primary attention includes producing a range of valves such as gate, globe, check, and ball valves, catering to various industries like oil and gas, petrochemicals, and power generation. Warren Valve's dependable and durable valves play a vital role in regulating fluid flow and ensuring operational safety in critical systems. With a pledge to quality and performance, Warren Valve subsidizes significantly to fluid control and management solutions.
-
-
-
-
-
U.S. Valve
LOW PRESSURE CHECK VALVE MANUFACTURER
Manufacturer Overview
U.S. Valve established in 1999, and based in New Jersey, USA, is a manufacturer and supplier of industrial valves. The product portfolio of the company includes a diverse range of medical gas valves, check valves, custom valves, ball valves, NSF-certified valves, elastomers, and other material valves. The products are used in various industries which involve vacuum pump, blower systems, air compression systems, power generation, water waste treatment, oil, gas, and other industrial applications. The company products are ISO-certified.
-
-
-
-
-
-
-
Trausch Dynamics
Inline check valves
Manufacturer Overview
Trausch Dynamics is an American custom manufacturer of pneumatic as well as hydraulic parts and components that was established in Grand Island, Nebraska in 1989. The company primarily produces pumps, reservoirs, air preparation units, and cylinders for hydraulic and pneumatic systems. It also offers various connectors, such as couplings, adaptors, and fittings according to customer specifications, as well as hose kits pre-assembled by application. The company’s products are commonly used in welding shops, food processing, plastic molding, and die casting operations.
-
-
-
-
-
NP Medical
Inline check valves
Manufacturer Overview
NP Medical is an American manufacturer of parts and components for life-sustaining therapy machines that was established in Clinton, Massachusetts in 1985. The company’s specialized product lineup includes tubing systems for connecting infusion devices to vascular access sites, pressure-activated valves that control the flow of fluids in infusion systems, and needle-free connectors that allow fluid transfer between syringes, catheters, and infusion sets. The company was established as a subsidiary of Nypro Inc. before Nypro was subsequently acquired by Jabil Inc. in 2013. It currently operates as an independent business unit within Jabil’s healthcare division.
-
-
-
-
-
TSI Flow Products
Inline check valves
Manufacturer Overview
TSI Flow Products is an American ISO 9001 certified manufacturer of high-pressure systems and components established in 1993 and based in Houston, Texas. The company primarily produces frac and flowback equipment, valves and chokes, wellhead components, and DC15 connections. It also offers custom fabrication services for skids, tanks, piping systems, and separators for customers with unique projects. The company maintains over 10 locations across North America, primarily serving client oilfield service providers, gas exploration and production companies, and drilling contractors.
-
-
-
-
-
Nordson Corporation
Check valves
Manufacturer Overview
Nordson Corporation, established in 1954 and headquartered in Westlake, Ohio, USA, is a global manufacturer and marketer of differentiated products for precision dispensing and processing. They cater to diverse end markets, including packaging, electronics, medical, energy, and transportation. With over 6,800 employees across more than 35 countries, Nordson offers solutions for bonding, adhesive dispensing, fluid management, test and inspection, and UV curing. Their product line includes dispense tips, syringe barrels, dispensers, srapy valves, fluids, and syringe systems among others. Comprised of eight divisions, they are ISO 9001:2015 certified and provide systems, precision technology, and after market parts.
-
-
-
-
-
Cash Acme
Inline Check Valves
Manufacturer Overview
Cash Acme is based in Atlanta, Georgia and has a history of over 100 years and is part of the RWC family of brands also including SharkBite, HoldRite, John Guest, and EZ-FLO. Cash Acme is a manufacturer of water control valves for residential, commercial, and industrial plumbing applications. Cash Acme products include pressure regulating valve, temperature & pressure relief valves, thermostatic mixing valves (TMVs), back flow preventers, general plumbing & heating, as well as other applications.
-
-
-
-
-
Bonney Forge Corporation
Inline Check Valves
Manufacturer Overview
Bonny Forge was originally founded in 1876 and is based in Mount Union, Pennsylvania. The company isis a manufacturer of fittings, valves, and other products used in petrochemical, refining, power, energy, and industrial piping markets. The company’s five product lines are Forged Steel Fittings and Unions, Forged Steel Branch Connections, Forged Steel Valves, Cast Steel Valves, and Forged Ball Valves. The company uses CAD to allow customers to customize desired specifications of machines, such as valve size, Cv coefficient, and material.
-
-
-
-
-
Entegris
Inline Check Valves
Manufacturer Overview
Entegris Inc., founded in 1966 and headquartered in Billerica, Massachusetts, is a supplier of advanced materials and process solutions for the life sciences, semiconductor, and other tech industries. Some of its products and solutions include specialty chemicals, gas delivery systems, and filters used by logic, memory, and semiconductor equipment manufacturers. Over 65% of its factories are ISO 14001 and ISO 45001 certified, while its stock is traded on NASDAQ under ENTG. The ISO 9001-certified company has 4,400 active patents and offers several services, including analytical, field support, and refurbishment services.
-
-
-
-
-
NIBCO INC.
Inline Check Valves
Manufacturer Overview
NIBCO INC. was founded in 1904 in Elkhart, Indiana. NIBCO is a worldwide manufacturer of flow control system solutions for residential, industrial, marine, and irrigation markets. NIBCO is ISO 9001:2015 certified. NIBCO products segments include system management including air separators and isolation strainers, fittings including metal and plastic fittings, tools, pipes, & accessories, and valves which includes among others, press tools, push tools, ball valves, boiler drains, butterfly valves, check valves, and gate valves.
-
-
-
-
-
Anchor Fluid Power
Inline Check Valves
Manufacturer Overview
Anchor Fluid Power is a manufacturer of fluid power components for high pressure hydraulic systems such as flanges, quick couplings, and more, based in Cincinnati, Ohio and was established in 1982. The company offers a wide range of products including hydraulic valves, flanges, hydraulic ball valves, suction and return line test point adapters and hoses. They are an ISO-9001 and ISO-45001 registered company, and provide solutions for their customers’ hydraulic connection requirements.
-
-
-
-
-
Conval
Inline Check Valves
Manufacturer Overview
Conval, established in 1967, and headquartered in Enfield, Connecticut, is a manufacturer that specializes in industrial valves. Their product range includes ball valves, gate valves, globe valves, and check valves which these products find applications in industries such as nuclear power, water treatment, agriculture, and hydraulic systems. Conval's valves are designed to handle high temperatures, pressures, and corrosive environments, ensuring safe and efficient flow control. The company holds certifications such as ISO 9001, demonstrating their adherence to quality and meeting industry standards. Their valves are crucial for process control and safety in various industrial applications.
-
-
-
-
-
Kennedy Valve
Inline Check Valves
Manufacturer Overview
Kennedy Valve is an ISO certified American waterworks manufacturer founded in 1877 and located in Elmira, New York. They have produced hydrants for firefighting and fire prevention in association with the American Water Works Association since 1913 along with plethora double disc gate valves, rotating disc gate valves, solid wedge gate valves, and check valves among others utilized in water and wastewater industries. The company is among the 17 McWane family of companies operating throughout the United States and Canada.
-
-
-
-
-
Western Enterprises
Inline Check Valves
Manufacturer Overview
Western Enterprises provides products for control, storage, and transmisson of gases to industrial and medical markets. They are located in the United States of America in the state of Ohio in the city of Westlake. The company was founded in the year 1952 and strives to provide high quality produccts such as medical regulators, flowmeters, and pipe fittings. Many of their products are useful for appliances such as air conditioners and heaters.
-
-
-
-
-
Superior Products, Inc.
Inline Check Valves
Manufacturer Overview
Superior Products, LLC is based in Cleveland, Ohio. Superior Products is a manufacturer and logistical provider of gas management systems and parts for customers globally, with many customers in industrial, medical, and specialty gas management markets. In addition Superior Products is certified ISO 9001:2008 Superior’s product offerings differ according to industry needs, with parts including couplers, valves, other connectors, gas mixers, and more. Additionally, Superior Products can custom engineer products to custom specifications in stainless steel, aluminum, brass, plastic, and titanium.
-
-
-
-
-
Kitz Corp. of America
Inline Check Valves
Manufacturer Overview
Established in 1951, KITZ Corporation of America is a manufacturer that specializes in producing and supplying industrial valves and controls for various industries such as oil and gas, chemical, power generation, and water treatment based in Stafford, Texas. KITZ provides various types of valves such as ball, gate, globe, check, and butterfly valves along with control valves and actuators. Their products are designed to control the flow of liquids and gases. With branch offices and subsidiaries in the United States, Germany, Brazil, Japan, and many locations throughout Asia, Kitz is able to serve customers globally.
-
-
-
-
-
Flight Works, Inc.
Inline Check Valves
Manufacturer Overview
Flight Works, Inc., founded in 2002, is a AS9100D / ISO 9001:2015 certified manufacturer of high precision miniature gear pumps in Irvine, CA, USA. Their pumps are designed to operate efficiently over a wide range of conditions, offering self-priming capabilities and excellent performance. From brushed motor pumps to magnetically driven models suitable for extreme environments, they cater to diverse client needs. With expertise in low-quantity prototyping and high-volume production, they offer customized solutions for aerospace, medical, chemical, energy, robotics, and other industries.
-
-
-
-
-
The Briggs Company
Inline Check Valves
Manufacturer Overview
The Briggs Company is headquartered in New Castle, Delaware, with sales offices in Virginia and Pennsylvania. The company is a custom manufacturer of transfer-related products and coupling retention technology for all industries, also offering design, fabrication, and distribution services. The company is a member of the Hose Safety Institute and NAHAD, the National Association of Hose and Accessories Distribution. The company offers pipe & fittings, hoses and assemblies, industrial fittings & disconnects, and other industrial rubber products.
-
-
-
-
-
TSI Technologies
Inline Check Valves
Manufacturer Overview
TSI Technologies, established in 1988 and headquartered in New York City, New York, is a global supplier of HVAC solutions. Some of the products offered include copper and brass brazed assemblies, brass service valves, copper and brass check valves, copper tubing, reversing valves, as well as steel receivers/accumulators and steel driers (dryers), and brazing alloys³⁸. These products serve various purposes in the air-conditioning and refrigeration industries. The company maintains and adheres to industry standards such as ISO-9001, QS-9000, U.L., and Q+ levels.
-
-
-
-
-
Viega USA
Inline Check Valves
Manufacturer Overview
Viega has a history of over 120 years and is based in Broomfield, Colorado. Viega is a developer and producer of hardware and industrial tools and pipe fitting technology. Viega’s equipment specializes in materials such as copper, stainless, polymer, lead bronze, and cupronickel. Some of Viega’s product listings include elbows, tees, adapters, flanges, caps, unions, couplings, reducers, branch connectors, tubing, manifolds, stub-outs, closet adapters, outlet boxes, press sleeves, closet risers, ballcock nuts, fasteners, sealing elements and gaskets.
-
-
-
-
-
Carlisle Fluid Technologies
Inline Check Valves
Manufacturer Overview
Carlisle Fluid Technologies is a conglomerate over many brands including BGK, Banks, DeVilbiss, Hosco, MS, and Ransburg. Through these brands, Carlisle Fluid Technologies globally distributes to industries such as aerospace, automotive OEM, automotive refinishing, general industrial, glass, protective coatings, and wood, solutions for numerous applications such as fluid and sealing needs. Carlisle Fluid Technologies’s product lines include diaphragm pumps, automatic applicators, air filtration, air regulators, hose and tube fittings, gas curing, inspection systems, nozzle cleaning systems, and more.
-
-
-
-
-
Rola-Chem Corp.
Inline Check Valves
Manufacturer Overview
Rola-Chem Corp., established in St Paul, Minnesota in 1900, is a manufacturer of Peristaltic Pumps, pH/ORP Controllers, Chemical Storage Tanks, and Flow Meters for the commercial swimming pool and SPA markets. Their product portfolio includes Pool Sentry water leveler, Turbo Brush, Corner Brush, Ultrashine leather/vinyl cleaner, and Scumbug oil absorbing sponge. They also offer various services including product selection, installation, preventative maintenance, maintenance, and repair as well as product manuals and customer support.
-
-
-
-
-
Beswick Engineering Co., Inc.
Inline Check Valves
Manufacturer Overview
Beswick Engineering was founded in 1964 as an engineering consulting firm. Beswick now operates out of Greenland, New Hampshire. Berwick serves the medical devices, aerospace, analytical instruments, bomb, gas, & narcotic detection equipment, semiconductor, dental, hydrogen fuel cell, industrial robot & automation, inkjet, 3D printing, and packaging & food packaging machinery industries. Beswick offers tubing, tubing clamps, cylinders, compression fitting accessories, filters, mufflers, breathers, orifice restrictors such as drilled orifice fittings and sapphire orifice fittings, valves, regulators, and quick disconnects. Beswick also offers custom design options.
-
-
-
-
-
Arcadian Services
Inline Check Valves
Manufacturer Overview
Arcadian Services, founded in 1988, is a manufacturer of chemicals and equipment used in car and truck wash industries and purposes such as power washing, industrial cleaners, and cleaners. The chemicals include waxes & protectants, wheel & tire cleaners and treatment, presoaks, hand sanitisers and private labelling. The company in Florence, Alabama, offers car wash equipment such as touchless in-bay automatic, soft cloth in-bay automatic, tunnel system and self-service system. The equipment services such as maintenance, installation and remodelling are offered.
-
-
-
-
-
Aero Space Controls Corp.
Inline Check Valves
Manufacturer Overview
Aero Space Controls Corporation was founded in 1965 and is based in Wichita, Kansas. Aero Space Controls is a producer of components often used in the aerospace and military sectors. Aero Space Controls has an extensive product catalog including categories such as actuators, valves, sensors, motors, and air conditioning-related components. Aero Space Controls also provides services including in-field and in-house repair and upper-level assembly. Upper-level assembly, combined with the upper-level design and development of actuators, pneumatic valves, air conditioning, and other components, provides turn-key read options for installation in aircraft.
-
-
-
-
-
Hayward Flow Control
Inline Check Valves
Manufacturer Overview
Hayward Flow Control was founded in 1923 and operates out of Clemmons, North Carolina. Hayward Flow Control is a manufacturer of industrial thermoplpastic valves and process control products. Hayward Flow Control product lines include thermoplapstic valves such as ball valves and butterfly valves, Hayward Filtration & Straining line, Hayward Actuation line including actuators and actuated valves, pressure & flow control valves, corrosion resistant pumps, instrumentation, bulkhead fittings & tank accessories, end connections, and other parts and accessories.
-
-
-
-
-
Ohio Medical LLC
Inline Check Valves
Manufacturer Overview
Ohio Medical Parts originated in 1910 as Ohio Chemical and Manufacturing Company in Cleveland, Ohio. Today Ohio Medical is a producer of medical air and vacuum pumping systems as well as medical suction and oxygen therapy devices. Ohio Medical services the medical device, medical gas, construction/renovation, ambulatory surgery center, industrial, and OEM solutions industries. Ohio Medical devices are manufactured in an ISO 13485 registered and FDA regulated medical device manufacturing facility. Product offerings include medical devices such as flowmeters, hoses, gas regulators, and suction regulators, as well as medical gas devices such as medical gas systems, vacuum pumps, air compressors, and medical gas accessories.
-
-
-
-
-
Clippard
Inline Check Valves
Manufacturer Overview
Clippard Instrument Laboratory, Inc. was founded in 1941 in Arkansas and is now located in Cincinnati, Ohio. The company is a manufacturer of miniature pneumatic valves, specializing in ultra low leak, precision pressure control, and high-resolution flow control. Categories of Clipard Products include electronic valves, proportional valves, isolation valves, electronic controls, custom solutions, ppressure regulators, control valves, directional control valves, air pilot valves, air preparation equipment, and fittings hose, and tubings.
-
-
-
-
-
Air Logic Division of Knapp Mfg., Inc.
Inline Check Valves
Manufacturer Overview
Air Logic’s parent company was started in 1935. In 1975, the parent company purchased Johnson Controls’ Fluidic Division and renamed it Air Logic, operating out of Milwaukee, Wisconsin. The company is an ISO 9001:2015 certified manufacturer of standard and custom molded components and fittings to customers in the United States and overseas. The company’s primary product categories include orifices, filters, check valves, switches, and regulators. The company also offers custom manufacturing through options of orifice and fitting sizing, as well as custom molding and material varieties.
-
-
-
-
-
Schutte & Koerting
Inline Check Valves
Manufacturer Overview
Schutte & Koerting (S&K) is an American manufacturer of power and process equipment established in Trevose, Pennsylvania in 1876. The company primarily produces components for pumping, mixing or handling liquids and solids, such as syphons, eductors, and jet ejectors. They also offer devices for handling liquids and gasses, including thermocompressors, condensers, and desuperheaters. S&K products are used in various industrial processes, including in metal and petroleum refining, power generation, and wastewater treatment.
-
-
-
-
-
SUPERLOK USA
Inline Check Valves
Manufacturer Overview
Superlok North America is a manufacturer of quality tube fittings, valves, and related products for various industries, including petrochemical, semiconductor, and biopharmaceutical. The company was established in 1998 and has since become a credible name in the industry, known for its products and excellent customer service. The company's product line includes a broad range of valves, fittings, and tubing products, such as ball valves, needle valves, check valves, tube fittings, and pipe fittings. In 2019, Superlok North America was awarded the prestigious "Supplier of the Year" award by a leading semiconductor manufacturer for its customer service and quality products.
-
-
-
-
-
Aqua Environment Co., Inc.
Inline Check Valves
Manufacturer Overview
Aqua Environment Co., Inc. established in San Rafael, CA in 1981 is a manufacturer of high-pressure valves and regulators for gas and fluid control. Their product portfolio includes Pressure Regulators, Gas Control Systems, fluid control accessories, and gate valves and check valves, used to handle a wide range of fluids and gases. The company serves industries such as Oil and Gas, Petrochemical and Refining, Chemical Processing, Aerospace and Aviation and Power Generation.
-
-
-
-
-
HYDAC Technology Corporation
Inline Check Valves
Manufacturer Overview
HYDAC technology Corporation was founded in 1963 and has head offices globally. HYDAC is a manufacturer and designer of hydraulic, electronic, control, and fluid conditioning solutions optimized for mobile and industrial applications. HYDAC serves the agricultural, forestry, automotive, construction machinery, machine tools, material handling, mining, municipal, oil & gas, power generation, primary metals, pulp & paper, and wind energy markets. HYDAC’s product offerings include hydraulic and lube filters, accumulators, valves, cooling systems, electric sensors & controls, filter systems, and IoT diagnostics, process filters, fuel filtration, power units, cylinders, and related accessories.
-
-
-
-
-
International Polymer Solutions, (iPolymer)
Inline Check Valves
Manufacturer Overview
International Polymer Solutions (iPolymer) is headquartered in Irvine, California. iPolymer is a manufacturer of high purity fluid valves, cylinders, and related arts used in semiconductor, biomedical, pharmaceutical, food and sanitary processes, high-purity laboratory, and other general chemical handling environments. iPolymer’s product categories include PTFE fittings & connectors, PTFE spray guns & devices, solenoid valves, pneumatic valves, manual valves, other flow devices, air cylinders, and custom polymer fabrication and assembly. Custom fabrication includes custom plastic fabrication, precision CNC machining of plastics, custom fluid control products, and contract assembly services.
-
-
-
-
-
SSP Fittings Corp.
Inline Check Valves
Manufacturer Overview
SSP Fittings Corp. was founded in Cleveland, Ohio in 1926 and is a vertically integrated supplier of fitting, valve, and tubing systems. SSP serves many industries including aerospace, chemicals, oil & gas, power, transportation, and pulp & paper. SSP product lines include fittings such as tube, pipe, and weld fittings; valves such as ball, bleed, needle, plug, and purge valves; tools, accessories, quick connects, filters such as inline and tee, hose, hose, hose fittings, power tools, accessories such as liquid leak detectors, and hand tools such as depth marking tools, tube benders, preswaging tools, gap inspection gauges, and reamer-deburring tools.
-
-
-
-
-
DFT Inc.
Inline Check Valves
Manufacturer Overview
DFT Inc., formerly known as Durabla Fluid Technology, is a manufacturer and provider of in-line check valves and severe service control valves founded in 1948. The company started by developing the Basic-Check valve for a customer needing a small metal-seated check valve with tight shut-off capabilities. With a rich history spanning over 70 years, DFT is Thomas Verified and a World Trade Center Member Company. They are ISO 9001:2015, 3-A, MSS, API 6D, CE, and PED Module H certified. It caters to the specific requirements of industries, including building maintenance, chemical processing, power generation, and more.
-
-
-
-
-
ASC Engineered Solutions, LLC
Inline Check Valves
Manufacturer Overview
ASC Engineered Solutions is based in Waynesboro, Pennsylvania. ASC serves the mechanical & plumbing systems, commercial & residential, mining, food & beverage, industrial, fire protection, oil & gas, energy & power, and water & wastewater industries as a procure and repair servicer. ASC is ISO 9001:2015 certified. A sample of ASC’s offerings include fire protection & fabrication products such as fabrication equipment and seismic bracing, flow control such as commercial& residential valves, performance products such as engineered pipe supports & snubbers, pipe joint systems such s grooved and high pressure fittings, as well as press products and support systems.
-
-
-
-
-
Swagelok
Inline Check Valves
Manufacturer Overview
Swagelok Company was founded in 1947 in Cleveland, Ohio as a tube fitting manufacturer. The company serves numerous industries including the chemical, clean energy, food & beverage, industrial machinery, life sciences, and wastewater treatment industries. The copmany's product categories include hoses and flexible tubing, sample cylinders, welding systems, tubing and accessories, and measurement devices. The company's also offers engineering services including field engineering, onsite services, design and assembly services, training, and construction services.
-
-
-
-
-
O'Keefe Controls Co.
Inline Check Valves
Manufacturer Overview
O'Keefe Controls Co., founded in Monroe, CT in 1975 is a manufacturer of precision orifices and fluid control devices used in a wide range of liquid and gas flow metering applications. The company's product portfolio includes low restrictors and regulators for precise control of flow rates, Single and multiple orifice plates for accurate flow measurement, Needle valves and flow control valves for precise flow adjustment and Gas Flow Measurement Devices. The company provides services such as Product Selection Guidance, Engineering Support, New Product Design and Development and Custom Manufacturing.
-
-
-
-
-
Check All Valve Manufacturing Co.
Inline Check Valves
Manufacturer Overview
Check All Valve Manufacturing Co. (CAVM) is a manufacturer and supplier of check valves founded in 1958 and based in Des Moines, Iowa. The company produces check valves with various connector types including flange, welded, and threaded units for use in oil and gas, food and beverages, water treatment, and chemical processing. Among the company's extensive product lineup are inline check valves designed to reduce pressure loss, spring check valves that can function optimally in all orientations, and poppet check valves engineered for intensive applications. CAVM also provides services for clients like technical support, custom design, and prototyping.
-
-
-
-
-
Midland Industries
Inline Check Valve
Company Overview
Midland Industries, is a manufacturing and distribution company of MAF/USA brass fittings, valves, clamps, tubing and plumbing accessories, headquartered in Kansas City, Missouri, the United States. The company’s product portfolio includes MAF/USA brass fittings, valves, clamps, tubing and plumbing accessories, etc., catering to a diverse set of industries. It represents consolidated companies including Anderson Metals, Midland Metal Mfg., Buchanan Rubber Ltd., Mid-America Fittings, and Stainless Adapters brands. As an OEM partner, it can help the distributor work with Original Equipment Manufacturers and specify solutions in order to make informed purchasing decisions around technology, applications and relevant specification requirements.
-
-
-
-
-
pdblowers, Inc.
Inline check valves
Company Overview
pdblowers, Inc., founded in 1990 with headquarters in the USA, is a manufacturer of industrial blower and vacuum pump systems and a distributor of accessories and equipment. The company's products include positive displacement blowers, vacuum pumps, noise and weather enclosures, and centrifugal blowers used in HVAC systems, soil remediation systems, air water separators, and air compressor systems. pdblowers, Inc. also offers UL control panels, plasma cutting, CNC punching, plate rolling, and welding services. The company also offers repair, refurbishment, custom design, testing, and production services.
-
-
-
-
-
CNC Flow Control
Inline check valves
Company Overview
CNC Flow Control, established in 2017 and headquartered in Houston, Texas, is a manufacturer and supplier specializing in flow control solutions. The company’s product portfolio includes valves, actuators and oilfield and flow line products. Brands like C&C and Force fall under their product umbrella of valves and fittings. The company’s products cater to diverse industries such as cooling, gas, fire protection, oil, and more. The company is ISO 9001-2015 certified and offers solutions backed by technical expertise, customer support from 'cradle to grave' and in-house quality control and inspections.
-
-
-
-
-
The Specialty Mfg. Co.
Check valves
Company Overview
The Specialty Mfg. Co., founded in 1902, is a manufacturer and distributor of valves, hydraulic couplers, pool/spa science automation, dental components, and custom machine tool fixtures from brass, plastic, and stainless materials. The products are strainers & filters, pressure controls, and valves such as check, ball, dental, cartridge, and custom valves for chemical dispensing, food & beverage, agriculture, transportation, and power generation industries. The company in St. Paul, MN, offers integrated services such as precision machining, metal stamping, grinding, plastic injection molding, and wire EDM. The company has an ABS Quality EValuation conformance certification.
-
-
-
-
-
East Bay Distributors Inc.
Inline Check Valves
Company Overview
East Bay Distributors, Inc. is a distributor for pneumatic applications, specializing in connectors, fittings, and industrial parts used across industries by both small companies and Fortune 500 corporations. The company’s distribution categories include SPC Fittings, SPC Products, Brass Fittings & Adapters, and Accessories. The company also features Dewalt protective products, including eyewear and work gloves. The company’s inventory management systems for customers offers benefits of lowering inventory costs, improving cash flow, and savings customers time and resources.
-
-
-
-
-
Rainmaker Pump Stations
Inline Check Valves
Company Overview
RainMaker Pump Stations was founded in 2001 and is based in Lexington, South Carolina. The company is a manufacturer of custom-engineered products for commercial, governmental, and residential customers. The company has five product lines: Industrial/Municipal, Agricultural Irrigation, Landscape Irrigation, Pump Controls, and Accessories. Through these lines, the company produces individual pumps, complete pumping systems, individual starters and control boxes, and other necessary components and fittings. The company’s other services include custom fabrication, startup, installation, and repairs for systems and individual products.
-
-
-
-
-
Western States Hardware
Inline Check Valves
Company Overview
Western States Hardware was founded in La Puente, California in 1968. Western States Hardware serves customers across the United States, offering products in a number of categories including: nuts, screws, & bolts, metric nuts, screws, & bolts, drills & cutting tools, saw blades, electrical connectors, pipe nipples, & pipe fittings, industrial brushes, parker brass fittings & valves, anchors, abrasive pads, belts, & discs, chain & rigging accessories, various tools, valves, staple & nail guns, power & insert bits, and hoses, tubing, & clamps. Altogether, Western States Hardware offers over 750,000 products available.
-
-
-
-
-
Ray Murray, Inc.
Inline Check Valves
Company Overview
Ray Murray, Inc. (RMI) was founded in 1973 and is a distributor of propane gas equipment appliances in the United States. Product categories include propane, compressed gas, hearth appliances, HVAC & heating, and outdoor living. The company’s catalog includes regulators, piping, cylinder valves, bulk plant & truck equipment, service tools, and outdoor living & heating products. The company offers additional customer resources such as product and tool installation, repair, and various customer services.
-
-
-
-
-
Steel & O'Brien Manufacturing
Inline Check Valves
Company Overview
Steel & O’Brien was founded in 1990 and operates out of Arcade, New York. Steel & O’Brien is a distributor of standard and custom-machined/fabricated fittings and assemblies. Steel & O’Brien serves the food, dairy, beverage, brewery, winery, distilling, biotechnology, pharmaceutical, cosmetic, personal care, extraction, semiconductor, and water treatment industries. Steel & O’Brien offers a range of products including various fittings, valves, actuators, diaphragm valves, pumps, accessories, sight glasses, strainers, filters, tubing, hangers, and others.
-
-
-
-
-
Becker & Associates, Inc.
Inline Check Valves
Company Overview
Becker is a service provider and stocking distributor of products and equipment for aviation refueling, petroleum handling, process, and industry. Becker & Associates was founded in 1967 and is headquartered in East Dundee, Illinois. Becker has two primary divisions, aviation and industrial. The aviation division provides aviation refueling equipment, fuel quality control testing equipment, fuel monitors, and more. The industrial division includes various filters and elements, spill kits, desiccants, and more. Becker’s manufacturers include Des-Case, Jonell, Facet International, Eaton, and Shawndra Products.
-
-
-
-
-
Sterlco Sterling Authorized Dist. - M & M Control
Inline Check Valves
Company Overview
Sterling Sterlco was founded in 1916 and distributes under M&M Control Service, Inc. is a specialist in industrial control units. Industrial control units are in two basic varieties: steam control family and temperature control units. Steam Control units include steam traps, Y strainers, temperature control valves, hand radiator valves, boiler feed pumps, condensate pumps, and centrifugal pumps. Temperature control units include portable chillers, central chillers, and water and oil temperature control units. Additionally, Sterling also manufactures pump tanks.
-
-
-
-
-
Seal Fast, Inc.
Inline Check Valves
Company Overview
Seal Fast, Inc. was founded in 1933 and is headquartered in Houston, Texas. Seal Fast is a distributor of sealing and fitting products. Seal Fast product categories include couplings, fire protection, gauges, pipe fittings and valves, hose and hose protection, and sheet rubber. Couplings include cam and groove, dry disconnect, shank, ring lock, foot valves, brass fittings, hydraulics, clamps, and banjo couplings. Fire protection equipment also includes gaskets, and industrial ground monitors. Gauges include siphons, oxygen, and thermowells. Pipe fittings and valves include combination nipples and flanges. Hose and hose protection include Fire hoses and industrial rubber. Sheet rubber includes skirt board and cloth insert neoprene.
-
-
-
-
-
Kinnear Specialties
Inline Check Valves
Company Overview
Kinnear Specialties, Inc. is a family-owned business founded in 1969 and based in Saint Helens, Oregon. Kinear Specialties is a manufacturer of custom hydraulic systems and a distributor of additional hydraulic machines, parts, and accessories. Kinnear Specialties has a broad line of products including hydraulic and pneumatic cylinders, pumps, hydraulic accessories, and accumulators. Complete custom filtering and hydraulic systems are available. Kinnear Specialties, Inc. also provides, design, installation, and repair services for hydraulic parts and systems.
-
-
-
-
-
Filtration Corp. of America
Inline Check Valves
Company Overview
Filtration Corporation of America (FCA), founded in 1976, is a distributor for Velcon Filters and other manufacturers related to the aviation industry. They have been able to support operations from county to major international airports and fuel storage terminals. The equipment they sell meets industry standards set forth by the Energy Institute for aviation fuels filtration equipment. They maintain a warehouse in the Chicago area with extensive inventory ready for shipment. Some of their products include filter vessels, filter cartridges, filter separators, clay treaters, and monitor vessels.
-
-
-
-
-
Doering Company
Inline Check Valves
Company Overview
Doering Company was founded in 1969 and operates out of Clear Lake, Minnesota. Doering is a distributor for pump-related products for markets such as marine, mining, industrial, energy, aerospace, forestry, and agriculture. Doering’s product lines include cartridge valves, hydraulic hand pumps, manifolds, mobile and agricultural valves, and hydraulic valves. Cartridge valves include directional control, flow control, pressure control, and load holding. Hydraulic hand pumps include dual-stage hand pumps and single-stage hand pumps. Manifolds and accessories include custom designs based on customer needs. Mobile and agricultural valves include directional-control and lock valves.
-
-
-
-
-
G.A. Murdock, Inc.
Inline Check Valves
Company Overview
G.A. Murdock was founded in 1992 and is based in Madison, South Dakota. The company is both a manufacturer and a distributor of the valve, fitting, and filters to customers around the world. Brands the company carries include Aquate, HM Digital, Relton, and Tomlinson. Through its in-house production, the company molds, extrudes and assembles molding products and turnkey custom plastics manufacturing services under the Mur-lok brand. The company’s other product line offerings include chemicals, instruments, pressure gauges, and tools.
-
-
-
-
-
Industrial Specialties Mfg., Inc.
Inline Check Valves
Company Overview
Industrial Specialties Manufacturing (ISM) was founded in 1982 in Denver Colorado. is an ISO 9001 company that supplies miniature pneumatic, vacuum, and fluid circuitry components to OEMs and distributors all over the world as well as providing custom solutions. The company serves distributors and offers not just sales but also marketing and logistics support with closed-loop feedback. Some of the types of products ISM offers include plastic fittings, customized fittings, sub-assemblies, and custom heat seal tooling.
-
-
-
-
-
MAXPRO Technologies, Inc.
Inline Check Valves
Company Overview
MAXPRO Technologies was founded in 195 and is founded in Fairview, Pennsylvania. MAXPRO is a distributor for pumping products including air driven liquid pumps, gas boosters, air amplifiers, high-pressure valves, fittings, and tubing. Other products include high-pressure fittings such as adapters, bulkheads, couplings, crosses, elbows, nipples, and tees. Rental equipment and complete systems such as air amplifier systems, liquid pumping systems, gas booster systems, oxygen gas booster packages, portable test carts, high pressure test systems and custom systems are also available.
-
-
-
-
-
ARI Valve Corp.
Inline Check Valves
Company Overview
ARI Valve Corporation is based in Marietta, Georgia, and is the manufacturer of valves and related parts for fluid, liquid, gas, and vapor handling processes used in the global automobile, shipping, chemical, food processing, and heating industries. The company has a wide range of valves available including bellows seal valves, control valves, and strainers/check valves. Additional product lines include steam traps, actuators, and manifolds. Customers needing a specific valve not among the hundreds available are encouraged to contact the company for more information.
-
-
-
-
-
Metraflex Co.
Inline Check Valves
Company Overview
Metraflex Company was founded in 1958 and is based in Chicago, Illinois. Metraflex is a distributor of piping specialty products to the commercial HVAC industry among others. These are used in vibration isolation, noise dampening, protection against thermal expansion and contraction, pipe alignment, seismic movements, pump connections, and flow conditioning. Metraflex Product categories include metal expansion joints, rubber expansion joints, Metraloop, seismic breakaway hangers, energy saving pump connectors, flexible metal hoses, flexible couplings, valves, compensators, strainers, air vents, pipe guides, anchors, wall penetration seals, and fittings.
-
-
-
-
-
Asahi/America, Inc.
Inline Check Valves
Company Overview
Asahi/America was born in 1971 to be the distributor for Asahi Yukizai Corporation products on the East Coast of the United States. Asahi/America serves the aquarium & entertainment, chemical processing, data center, metal finishing, and the water/wastewater industries. The company offers a selection of valves and actuators including many types of valves, high purity piping, air & gas handling, double containment, and welding equipment. The company alos offers a wide assortment of custom fabrication of parts and components.
-
-
-
-
-
TVI Valves
Inline Check Valves
Company Overview
TVI Valves was originally founded in 1986 and is currently headquartered in Emmaus, Pennsylvania. The company is a distributor of valves and accessories to numerous industries ranging from amusement parks to health care to photography to water purification. The company’s four primary product lines are Plastic Valves, Metal Valves, Instrumentation, and Valve Accessories. Examples of valves include ball, butterfly diaphragm, and plug valves. Valve accessories include actuators, stem extensions, gears, fasteners, and other devices.
-
-
-
-
-
RED-WHITE VALVE CORP.
Inline Check Valves
Company Overview
RWV was founded in 1971 as a joint venture between Mitsui & Company, Ltd. and Toyo Valve Company, Ltd. of Japan as Red White Valve Corp. In 2003, the company joined Valvoindustria Ing. Rizzio of Italy and today is headquartered in Lake Forest, California. The company is an ISO 9001:2015 and 14001:2015 certified manufacturer of valves for various industries, sold through stocking and non-stocking distributors. The company’s valve products by category include lead-free, hydronic, standard, and commercial & industrial valves. The company’s products by type include balancing, ball, butterfly plumbing, and radiator valves.
-
-
-
-
-
-
-
Ohio Pipe, Valve & Fittings, Inc.
Inline Check Valves
Distributor Overview
Ohio Pipe, Valves, & Fittings, Inc. was founded in 1929 as Ohio Pipe Bending & Coiling Company. Also known as the Ohio Pipe companies, they specialize in fully welded, seamless, stainless steel, and PVC pipes of many sizes. Ohio Pipe companies also sell flanges, couplings, ball, butterfly, gate, control, and relief valves, with thousands of unique items in stock. Ohio Pipe companies’ past and current customers include power plants, steel mills, oil and gas companies, chemical plants, water and wastewater facilities, as well as many OEMs.
-
-
-
-
-
Maxpro South, Inc.
Inline Check Valves
Distributor Overview
MaxPro South, Inc. was founded in 2000 and is based in Humble, Texas. MaxPro South is a stocking distributor of liquid pumps, gas boosters, air amplifiers, valves, fittings, and tubing. MaxPro South specializes in MAXIMATOR brand products. Rental equipment including coning and threading machines, hydrostatic testing equipment, and gas booster equipment is also available. MaxPro South uses factory-certified parts to repair and condition liquid pumps, gas boosters, air amplifiers, and valves. MaxPro South also offers on-site installation of custom systems including coning, threading, and bending of tubing. Service contracts are also available.
-
-
-
-
-
Bailey Motor Equipment Co.
Inline Check Valves
Distributor Overview
Bailey Motor Equipment Co. was established in 1933 and located in Orlando, Florida. Bailey Motor Equipment Co. serves the agriculture, industrial, oil and gas, automotive, and marine trades to customers globally. Bailey Motor Equipment Co.’s offerings include PIC liquid filled gauges, pressure and vacuum gauges, switches, float switches, relays, temperature gauges, fluid level switch gauges, electric gauges, battery chargers, as well as additional products including remote communication components, remote communication packages, voltmeters, and fuel tank lines.
-
-
-
-
-
Reasontek Corp.
Inline Check Valves
Distributor Overview
Reasontek Corporation was founded in 2009 and is headquartered in Brea, California. The company is a distributor of products that primarily serves the technology and domestic and global oilfield equipment and industrial supplies industries. The company has two primary business segments: accumulator production and oilfield equipment and industrial supplies. The accumulator production segment includes accumulators and other energy storage and surge protection devices as well as CAD services. The oilfield equipment and industrial supplies segment includes bladder accumulators, repair kits, and related accessories.
-
-
-
-
-
Oil-Air Products, LLC.
Inline Check Valves
Distributor Overview
Oil-Air Products began in 1983 and is based in Plymouth, Minnesota. OAP is a distributor of fluid power systems and offers other services. Product listings include measurement instrumentation, pneumatics, custom manifolds, power units, lubrication, pumps, motors, valves, planetary gearboxes, accumulators, flow meters, and pumps. Other services include custom system design, hose assembly fabrication, troubleshooting, and component selection, as well as machine and part inspection and either on-site or inhouse repair options.
-
-
-
-
-
World Wide Metric, Inc.
Inline Check Valves
Distributor Overview
World Wide Metric was founded in 1970 and is based in Branchburg, New Jersey. World Wide Metric is a distributor of products for the global maritime & industrial flow control and fluid power markets. World Wide Metric products include valves in DIN, JIS, and ANSI standards, fittings such as hydraulic, JIC flared, ORFS, and BSP adapters, flanges, tubing, coupling, expansion joints, tube clamps, gaskets, marine firestop, RM pressfit & drain, and other industrial products.
-
-
-
-
-
Sutton-Garten Co.
Inline Check Valves
Distributor Overview
Sutton Garten Co.’s history dates back to1916 in Indianapolis, Indiana. Sutton Garten is an independent welding distributor, providing products and services. Sutton Garten’s product offerings include welding abrasives, dry ice & blast equipment, electric welding equipment & supplies, filler metals, flux and chemicals, fume extraction equipment, gases, cylinders, dewars, gas equipment for welding, welding hand tools, plasma cutting equipment, metal cutting sawing grinding tools, welding safety equipment, and weld accessories. Sutton Garten’s service offerings include bulk gas installations, carbon dioxide gas fill service, rental welding & cutting equipment as well as repairs.
-
-
-
-
-
Compressed Air Systems, Inc.
Inline Check Valves
Distributor Overview
Compressed Air Systems was founded in Tampa, Florida in 1963. Compressed Air Systems supports customers in a wide array of industries including food & beverage, medical applications, industrial, electronics, fleet maintenance, aerospace, pharmaceuticals, plastics processing, CNC machine shops, and woodworking. Compressed Air Systems sells air compressors, railcar gate openers and various related products. Compressed Air Systems also offers services including audit, leak compressed air leak elimination, compressed air rentals, and turnkey packages for industrial equipment systems.
-
-
-
-
-
Circle Valve Technologies Inc.
Inline Check Valves
Distributor Overview
Circle Valve was founded in 1986 and headquartered in Harleysville, Pennsylvania. Circle Valve is a value-added distributor and manufacture rep of industrial valves, fittings, filters, and measurement control devices for a variety of industries and applications. Among Circle Valve’s product listings are check valves, relief valves, vacuum & high purity fittings, circle seal solenoid valves, Jefferson solenoid valves, Atkomatic solenoid valves GO regulators, cryogenic valves & equipment, hoke valves, Gyrolok Tube Fittings, Circle Seal Control Valves, and various measurement devices.
-
-
-
-
-
NTGD Valve (China) Co. LTD
Spring Check Valve
Manufacturer Overview
NTGD Valve (China) Co., Ltd. is a manufacturer and supplier of industrial valves that was established in 1991 and is headquartered in Kaifeng, Henan, China. The company produces a wide range of valves, including ball valves, gate valves, globe valves, check valves, and butterfly valves. Its products, such as Forged Ball Valves, Flange Globe Valves, Wedge Gate valves, Lubricated Plug Valves, Dual Plate Check Valves, and Swing Check Valves, are used by a number of industries, as diverse as oil and gas, power generation, and water treatment industries.
-
-
-
-
-
Longda
Check Valve Manufacturers
Manufacturer Overview
Zhejiang Longda Water Technologies Co., Ltd, formerly known as Taizhou Longda Copper Industry Co., Ltd, is a manufacturer of various kinds of valves, sanitary wares, and plumbing bibcock. The company was established in 1993 and is based in Zhejiang Province. Longda offers a wide range of valves including Stop Valves, Brass Ball Valves Washing Machine Valves, and Angle Valves forged and machined from lead-free brass. The company's products are used for various applications including in the controlling systems for hot/cold water, chemicals, and gas.
-
-
-
-
-
GL Sciences Inc
In-Line Check Valves
Manufacturer Overview
GL Sciences Inc., established in 1968 and located in Tokyo, Japan, is a manufacturer of gas/liquid chromatography equipment, pretreatment equipment, and more. The company produces liquid chromatography/mass spectrometry columns as well as gas chromatography/mass spectrometry capillary columns. It also manufactures gas chromatography packed columns and absorbents, disposable filters, tubing products, bioproducts, and cells. Its products are used for petrochemistry, drugs, medicine, semiconductors, cosmetics in the field of industry, water pollution, residual pesticides, and environment.
-
-
-
-
-
Tube Clamps India Pvt. Ltd.
6000 PSI Check Valve
Manufacturer Overview
Tube Clamps India Pvt. Ltd., founded in 1997 with headquarters in India, is a manufacturer of hydraulic and pneumatic equipment, instruments, and components. The company's extensive product line includes hydraulic hose flange fittings, hydraulic solenoid valves, manifold check valves, high-pressure hydraulic hose piping, and Venturi tube flow elements. Tube Clamps India serves various markets, including the food and beverage industry, machine building, energy and power plants, and vessel construction. Some examples of how the company's products are used include air compressors, spray cans, and vehicle carburetors. Tube Clamps India Pvt. Ltd. also offers customized component design, engineering, and production services.
-
-
-
-
-
IMI Critical Engineering
Our expertly manufactured Check Valves
Manufacturer Overview
IMI Critical Engineering is a manufacturer of flow control systems and valve solutions established in 1862 and based in Birmingham, United Kingdom. It manufactures high and medium-pressure valves, such as pressurizer safety, compressor, turbine bypass, chemical, and steam valves. Its products are utilized in oil and gas, marine, petrochemicals, sanitary, and life sciences sectors across Sweden, Germany, Austria, China, and the USA. Its manufactured products are ISO 9001:2000 certified and adhere to the standards of OSHA and European Pressure Ratings. The company is part of IMI plc, an engineering company in England, and has received the Global Supplier Awards in 2022.
-
-
-
-
-
Jiayuan
In line Check Valve
Manufacturer Overview
Jiayuan established in China, in 1998, is a manufacturer engaged in machinery accessory and connection of hydraulic pipe with the Certificate of ISO 9001. Their product line includes diaulic system connection including tube fittings connector, hose assembly, flange block, valve and accessory. The company's products are used in industries such as construction, infrastructure development, agriculture, transportation and mining. The company has distribution channel in Japan, Germany, UK, France, Sweden and Korea.
-
-
-
-
-
KEIHIN CO., LTD
Check Valves
Manufacturer Overview
KEIHIN CO., LTD, founded in Japan, in 1953 is a manufacturer of industrial valves. The company's product portfolio includes ball valves, ate valves used for isolating and regulating the flow of liquids, gases, and slurry, Check Valves, Pressure Relief Valves, and diaphragm valves used for sterile and aseptic applications in the pharmaceutical and food industries.Their products are used in markets such as Automotive and Transportation, Telecommunications, Industrial Automation, Healthcare and Medical Devices and Aerospace and Defense.
-
-
-
-
-
Nihon Pisco Co., Ltd.
Check Valve
Manufacturer Overview
Nihon Pisco Co. Ltd., founded in 1976 and based in Nagano, Japan, is a manufacturer and distributor of pneumatic equipment and is ISO 9001 and ISO 14001 certified. The company stocks various products like valves, actuators, and vacuum accessories used in several industries, including semiconductor, medicine, and rechargeable battery. The company started selling push-in fitting for pneumatic piping in 1977 and launched the industry’s first push-in fitting built-in type speed controller in 1981. In 1993, it launched a few products, including a quick exhaust valve, a digital pressure sensor, and a vacuum generator with a digital pressure sensor.
-
-
-
-
-
NACHI-FUJIKOSHI CORP.
IN-LINE CHECK VALVE
Manufacturer Overview
NACHI-FUJIKOSHI CORP. is a Japanese manufacturer of industrial machinery and tools, such as bearings, hydraulic equipment, robots, and cutting tools. They also provide services such as machine maintenance and repair. The company's products are used in automotive, aerospace, construction, and electronics. One of NACHI-FUJIKOSHI's renowned products is their robotic arm, the "MZR series," which is designed for precision assembly and inspection tasks in industries. They received several awards for their technological advancements and contributions to the industry, including the 2021 Japan Society of Mechanical Engineers Medal for new hydraulic equipment technology and the 2020 Nikkan Kogyo Shimbun Grand Technology Award.
-
-
-
-
-
Stäubli International AG.
Inline Check Valves
Manufacturer Overview
Stäubli began in Horgen, Switzerland in 1892. Stäubli designs, produces, distributes, and provides support for products for numerous industries including aerospace, alternative fuels, medical devices, packaging, photovoltaics, and semiconductors. Stäubli has 4 primary product lines including electrical connectors, fluid connectors, robotics, and textile. Electrical connector products include cable couplers, modular connectors, and test and measurement connectors. Fluid connectors include mold clamping systems, quick and dry disconnect couplings, and safety breakaway couplings. Robotics include industrial robots, collaborative robots, and mobile robots. Textile includes weaving preparation and frame weaving.
-
-
-
-
-
IPEX
Inline Check Valves
Manufacturer Overview
IPEX by Aliaxis is headquartered in Oakville, Ontario. IPEX is a producer of pipe-related solutions defined in 6 categories: municipal, plumbing & mechanical, industrial, electrical, PE electrofusion, and irrigation. The company's municipal solutions include pressure piping and sewer piping systems in addition to specialty products. Plumbing & Mechanical solutions also include fire protection, gas venting systems, and potable water systems. Compressed air and acid waste systems are used in industrial systems. Light fixtures and ducts are keystones of the electrical solutions segment.
-
-
-
-
-
WEH GmbH
Inline Check Valves
Manufacturer Overview
WEH Technologies Inc., USA was created in 2008 in Texas as the American branch of WEH GmbH which was founded in 1973 in Germany. The company is a designer and manufacturer of components for the gas and hydrogen refueling industries. The company’s 4 product lines are Quick Connectors, CNG Refueling Components, H2 Refueling Components, and Check Valves. Quick Connectors are used in manufacturing, automation, HVAC, and other industrial uses. CNG Refueling Components are used in CNG vehicles, car stations, and bus stations. Hydrogen Refueling Components are used in hydrogen vehicles and refueling stations.
-
-
-
-
-
MICO, Inc.
In-line Residual Check Valves
Manufacturer Overview
MICO, Inc., established in 1946 and headquartered in North Mankato, Minnesota, USA, is a manufacturer of hydraulic components and controls. The company specializes in producing hydraulic brake systems, brake valves, and hydraulic actuation solutions. The products are used for precision, stability, and the ability to provide optimum braking and control performance, ensuring the safety of various vehicles and machinery. These products find application across diverse industries, including off-highway vehicles, agriculture, construction, and material handling equipment, where the need for precise and responsive hydraulic control is essential.
-
-
-
-
-
G -Science
Regulator
Manufacturer Overview
GL Sciences is a Japanese manufacturer of gas and liquid chromatography equipment that was established in Shinjuku, Japan in 1968. The company produces liquid and gas chromatographs, columns for separating compounds, fillers for making up stationary phases in columns, and consumables. It also offers gas and air sampling equipment, HPLC instruments, and helium leak detectors. The company’s products are used primarily in the life sciences, environmental sustainability, food processing, and mining industries.
-
-
-
-
-
Vaccon Co., Inc.
Inline Check Valves
Manufacturer Overview
Vaccon Co., Inc., now NORGREN, has roots dating back to 1947, was originally founded in 1972, and headquartered in Saline, Michigan. NORGREN is a manufacturer with expertise in die and automation design. NORGREN product lines include adaptive transforming tools, double blank analyzers, grippers & shovels, mounting solutions, carbon fiber structures, thread, stud, & nut detection, tool changers, vacuums, and modular tooling in industrial automation & cabots. NORGREN services include automation and tooling, die engineering, carbon fiber, and vacuum services as well as expertise to assist customers adapt old equipment for new applications or in new plants.
-
-
-
-
-
Alfa Laval Corporate AB
Inline Check Valves
Manufacturer Overview
Alfa Laval Corporate AB was founded in 1883 and headquartered in Lund, Sweden. Alfa Laval serves energy, utilities, home, personal care, food, dairy, beverage, marine, transportation, pharmaceutical, biotech, water, and wastewater industries. Alfa Laval provides heat transfer, separation, and fluid handling products and solutions worldwide. Alfa Laval operates in three divisions: Energy, Food & Water, and Marine. Alfa Laval offers oil & gas-fired steam and composite steam boilers, exhaust gas economizer, and ballast water treatment systems, and exhaust gas cleaning products. Alfa Laval also provides sensing and control, cleaning validation, condition monitoring, agitators, tank, powder mixers, fittings, and tubes, as well as wall mounted cleaning nozzles, rotary jet and heads; and tank accessories and covers.
-
-
-
-
-
Crane Instrumentation & Sampling PFT Corp.
Inline Check Valves
Manufacturer Overview
Hoke was founded in 1925 in Queens, New York as a gas flow control valve manufacturer for jeweler’s torches. The ISO 9001-certified company has grown to become a manufacturer of many parts for alternative fuel markets, chemicals, petrochemicals, paper, and power generation markets. The company produces multiple varieties of valves, fittings, actuators, cylinders, and other products designed to specific pressure and temperature standards. The company offers CAD products for valves, actuators, and other products to assist in product design and selection.
-
-
-
-
-
Dk-Lok U.S.A.
Inline Check Valves
Manufacturer Overview
DK-Lok USA was established in 2010 and is the U.S.-based subsidiary of South Korean industrial parts maker, DK-Lok. DK-Lok serves industries such as offshore & onshore oil production, automotive & hydrogen fuel cells, shipbuilding & marine engines, petrochemicals & refinery, power plant, railway vehicles, and semiconductors. DK-Lok USA’s primary offerings are valves, fittings, regulators, hose, tubing, quick connectors, and tools such as hydraulic swaging units, electric swaging units, presaging tools, and tube & hose.
-
-
-
-
-
Mako Products LLC
Inline Check Valves
Manufacturer Overview
Mako Products LLC manufactures and supplies quality fluid system components, including Superlok compression tube fittings, a patented product popular for its perfect fitting. The company's other products include threaded needle valves, ball valves, JIC fittings & adapters, stainless steel tubing, and related products. The company was founded in 2012 and is based in Oklahoma, USA. Their products are designed for various industries, including petrochemical, shipbuilding and maritime, semiconductors, aerospace, and biopharmaceuticals.
-
-
-
-
-
Cincinnati Valve Company
Inline Check Valves
Manufacturer Overview
Cincinnati Valve Co., founded in 1994 and headquartered in Cincinnati, Ohio, is a manufacturer and supplier of industrial valves. They cater to diverse industries such as oil and gas, energy, water, and mining, offering a product line that encompasses an extensive range of valves, including ball valves, butterfly valves, gate valves, and globe valves, as well as check valves and plug valves in bronze, iron, and cast steel. These components are used to control the flow of fluids in various industrial processes, enabling precise regulation of flow rate, pressure, and direction for control and safety.
-
-
-
-
-
Cipriani Harrison Valves Corp.
Inline Check Valves
Manufacturer Overview
Cipriani Harrison Valves Corp., founded in 1983, is a manufacturer and supplier of valves, tank head fittings, pipeline comps, and valve manifolds. The valve types include butterfly, seat, sampling, check, and mix-proof valves made from bar stock and forged stainless steel to be used in dairy, brewery, pharma & bio-pharma, winery, and cosmetic markets. The company in Gujarat, India, is 3A authorized, has FDA & Class VI certified elastomers, offers product inspection and testing, and is ISO 9001:2015 certified.
-
-
-
-
-
Haskel International
Inline Check Valves
Manufacturer Overview
Haskel began in 1954 and is now part of Ingersoll Rand. Haskel is a designer and manufacturer of high-pressure industrial gas and liquid handling equipment in three categories: hydrogen refueling, products, and aftermarket. Hydrogen refueling includes, refueling stations, hydrogen compressors, hydrogen compression and transfer, hydrogen valves fitting and tubing. Products include liquid pumps, refrigerant pumps, gas boost compressors, air pressure amplifiers, packaged systems, spare parts, system components, and high pressure valves. Aftermarket support includes support for hydrogen stations, repair, maintenance, service, and spare parts.
-
-
-
-
-
Zoeller Company
Inline Check Valves
Manufacturer Overview
Zoeller Company was founded in 1939 and currently is based in Louisville, Kentucky. The company is an independent manufacturer of pumps and related equipment through numerous divisions. Some of these divisions include Star Water Systems, Tulsar Custom Controls, Lincoln Industries, Flint & Walling, and Wolf Customized Pumps. Zoellar Family of Water Solutions has four product segments: Water Movement In, Water Movement Out, Water Treatment, and Controls. Each unit serves residential, municipal, industrial, and commercial systems and customers.
-
-
-
-
-
Parker / Autoclave Engineers
Inline Check Valves
-
-
-
-
-
Emerson Electric Co.
Inline Check Valves
Manufacturer Overview
Founded in 1890 in Missouri, Emerson Electric Co., is a technology and engineering company that provides various solutions for customers in industrial, commercial, and consumer markets globally. Business segments include automation solutions, AspenTech, and commercial & residential solutions segments. The Automation Solutions segment offers measurement and analytical instrumentation, industrial valves and equipment, and process control software and systems. The AspenTech segment provides asset optimization software for enhancing performance through a combination of modeling, simulation, and optimization capabilities. The Commercial & Residential Solutions segment offers residential and commercial HVAC products, system protector and flow control devices, and IoT thermostats.
-
-
-
-
-
Lee Company
Inline Check Valves
Manufacturer Overview
The Lee Company was founded in 1948 and is headquartered in Westbrook Connecticut. The company manufactures flow metering, fluid pumping, and related products for industries such as aerospace, automotive, power generation, and medical equipment to customers around the world through its global distribution network. The company’s primary product lines include valves, flow restrictors, pumps, and plugs. The company also offers customized products for individual markets to meet specific standards for each industry according to individual customer needs.
-
-
-
-
-
XHVAL Valve Co., Ltd.
Check Valve
Company Overview
XHVAL, established in 1986 and headquartered in Ningbo, China, is a manufacturer and supplier of industrial valves. The company’s product range comprises ball valves, gate valves, butterfly valves, globe valves, and safety valves, serving diverse industries including power, oil and gas, chemical, and water treatment. Its services include engineering and design, testing and certification, and installation as well as maintenance and repair. Devoted to customer satisfaction, it continually develops new products and services to meet customer needs. Additionally, the company holds ISO 9001:2015 certification, showcasing its passion for quality products and processes.
-
-
-
-
-
AF Hydro
Single plate CHECK valves
Company Overview
AF Hydro, (Addison Fluids), a subsidiary company of RFS Hydraulics Pte Ltd established in 2016, is a Singapore-based manufacturer and supplier of valves, fittings, and tubes used in the plumbing industry. The company offers low-pressure products made from materials such as stainless steel, cast steel, forged steel, brass, and cast iron. These products include gate valves, Y-strainers, camlock fittings, copper tubes, butterfly valves, and copper coils. The Copper Tubes and Copper Coils are made from JIS H3300 C1220T and ASTM B88 standards.
-
-
-
-
-
Camel Precision Co., Ltd.
CML In-Line Check Valve
Company Overview
Camel Precision Co., Ltd. CML, since 1981, is a manufacturer and supplier of hydraulic valves and hydraulic pumps with its headquarters in Taichung City, Taiwan. The company’s product portfolio is composed of variable & fixed displacement vane pumps, internal & external gear pumps, high-back pressure & high-flow type solenoid valves, conventional valves, and modular valves. They also offer various accessories for their valves and pumps such as filters, oil coolers, diaphragm accumulators, air-cooled radiators, and oil-electric pressure switches. These products are used in various machinery industries including shoemaking, rubber & plastic, machine tools, and agriculture.
-
-
-
-
-
Sure Flow Equipment, Inc.
Inline Check Valves
Company Overview
Sure Flow Equipment, Inc. is headquartered in Burlington, Ontario. Sure Flow Equipment is an ISO 9001:2015 certified manufacturer and distributor of industrial valves, strainers, and other fluid control machines used across industries. Sure Flow Equipment’s product lines include various strainers including duplex strainers, valves butterfly valves, bleed rings, joints, and other parts. Sure Flow Equipment provides resources such as videos, technical information, and usage guides to assist customers in installation and operation.
-
-
-
-
-
IDEX Health & Science LLC.
Inline check valves
Company Overview
IDEX Health & Science, established in 1971 and headquartered in Rohnert Park, California, USA, is a manufacturer and supplier of fluidics and optics products and solutions. The company’s fluidics product range includes valves, connectors, filters, and other components vital for precise fluid control. In optics, they offer microscopes, imaging systems, and optical instruments. These products find applications in various fields, including medical diagnostics, pharmaceutical research, industrial manufacturing, environmental monitoring, and food/beverage testing. Devoted to quality and sustainability, the company serves its global customers with over 7,000 employees under the umbrella of IDEX Corporation.
-
-
-
-
-
Mueller Streamline Co.
Inline Check Valves
Company Overview
Mueller Streamline Co. established in Collierville, Tennessee in 1838 is a manufacturer and distributor of piping system products. Their product portfolio includes pipe supports, hangers, and clamps, PVC pipes, HDPE pipes, stainless steel pipes, and heck valves, used for regulating flow and control fluid in piping networks. The company serves industries including Water and Wastewater Management, Oil and Gas, Petrochemical and Refining, Chemical Processing, and Power Generation. The company also offers customized services and technical support.
-
-
-
-
-
Tank Truck Service & Sales, Inc.
Inline Check Valves
Company Overview
Tank Truck Service & Sales, Inc. has been designing and building tank trucks since 1948 and is based in Warren, Michigan. The company is a manufacturer, assembler, and distributor of tank trucks and trailers. The company's product offerings include parts and components including tank truck equipment, bulk plant and storage tank equipment, dry break or dry disconnect fittings, valves, hose, hose reels, meters, swivel joints, gaskets, and pipe sealants. Tank truck offerings include refined fuel trucks and trailers, LGP trucks, and specialty tank trucks. Additionally, The company offers metalwork, equipment work, dot testing, paintwork, and sensor repairs.
-
-
-
-
-
FLSmidth, Inc.
Inline Check Valves
Company Overview
Important Papers, Inc. was founded by Ruth Barnett in South Jersey in the early 1990s. Important Papers is a distributor of promotional items and custom apparel for company promotion. Examples of Important Papers, Inc. promotional items include: apparel such as t-shirts, office wear, outerwear, bottoms, sunglasses, and activewear; headwear such as caps, hats, beanies, visors, safety items, and bandanas; bags such as tote, backpacks, office & school, outdoor & fitness, and travel; drinkware, fun, health, office, tech, writing, and other miscellaneous items.
-
-
-
-
-
Erdmann Corp.
Inline Check Valves
Company Overview
Erdmann Corp. is a distributor of industrial valves and related equipment that was established in Kentucky, USA, in 1933. The company’s product inventory includes boiler controls for indoor heating applications, actuated valve accessories for material flow, and pressure regulators for safety applications. It also offers custom fabrication, repair, and field service or troubleshooting for clients requiring additional support. The company chiefly serves clients in the chemical and petrochemical, distillery, and water and wastewater processing industries.
-
-
-
-
-
Motion Industries, Inc.
Inline Check Valves
Company Overview
MiMotion was founded in 1946 in Birmingham, Alabama and today operates under Genuine Parts Company. The company operates as a distributor and supplier of custom parts for both maintenance repair and operating replacement part market and the OEM market. The company’s product line includes many types of products including abrasives, chemicals & lubricants, hand & power tools, hose & fittings, and process pumps & equipment. The company also provides maintenance repair and operating replacement parts as well as OEM parts ensuring compatibility with existing customer operations.
-
-
-
-
-
Caylor Industrial Sales, Inc.
Inline Check Valves
Company Overview
Caylor Indstrial Sales, Inc. was founded in Dalton, Georgia in 1980. Today, Calor serves a number of sectors of the industrial market, in particular engineering, construction, manufacturing, paper mills, and chemical plants. The company is a distributor of many industrial components including valves, fittings, pipe and tube hangers, actuators, and water, steam, and air regulators. The company also offers services as a manufacturer of both low and high-volume production custom parts using a variety of materials including steel, stainless steel, aluminum, brass, Delrin, and Lexan.
-
-
-
-
-
Lumaco
Inline Check Valves
Company Overview
Lumaco, established in 1961, and headquartered in Hackensack, New Jersey, is a supplier and distributor of valves and valve components for various industries. The company offers a range of products, such as doubledisk valves, butterfly valves, check valves, and pressure relief valves in which their valve solutions cater to industries such as food and beverages, and dairy industry. Lumaco's valves and components are designed for flow control, regulation, and isolation, ensuring efficient and safe operation in industrial applications. Lumaco prioritizes quality and delivers industry-standard valve solutions to meet their customers' needs.
-
-
-
-
-
PARKER HANNIFIN CORP
Inline Check Valves
Company Overview
Parker Hannifin Corporation was founded in 1917 and is headquartered in Cleveland, Ohio. Parker Hannifin is a manufacturer and distributor of motion and control technologies and systems for markets including mobile, industrial, and aerospace. Parker-Hannifin operates through two segments: diversified industrial and aerospace systems. Diversified industrial offers sealing, shielding, thermal products and systems, adhesives, diagnostics solutions, and hydraulic, pneumatic, and elctromechanical components and systems or industrial machinery and equipment. The aerospace segment offers control actuation systems and components, engine exhaust nozzles and assemblies, pilot controls, as well as others.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Core & Main LP
In-Line Check Valves
-
-
-
-
-
XINTAI VALVE GROUP CO., LTD.
Check Valve Collection
Company Overview
XINTAI Valve Group Co., Ltd., founded in China in 1998, is a valve manufacturing company. The company offers a wide range of industrial valves, including power station valves, API cast steel valves, hydraulic control valves, thread valves, and antibiotic valves. The company also provides full-service industrial valve manufacturing and design services, quality inspection, and after-sales services for multiple clients, such as oil and gas companies, power plants, and chemical plants.
-
-
-
-
-
LODHA INDUSTRIES
Inline Check Valve
-
-
-
-
-
The HC Company
Check Valves - HVD Positive
-
-
-
-
-
New Line Hose & Fittings
Inline check valves
Distributor Overview
New Line Hose & Fittings, established in 1972, is a distributor based in the United States, specializing in providing a comprehensive range of hoses, fittings, and related products. New Line Hose & Fittings has been a partner for industries like construction, manufacturing, and agriculture. They deliver quality solutions supports efficient fluid conveyance and transfer. New Line Hose & Fittings stands out with its devotion to meeting the diverse needs of its clients. For instance, their offerings include hydraulic hoses, industrial hoses, and hose accessories that ensure seamless fluid handling in various applications. Their tailored solutions enhance operational reliability and safety.
-
-
-
-
-
John Bouchard & Sons Co.
Inline Check Valves
Distributor Overview
John Bouchard & Sons Co. was founded in 1900 and is headquartered in Tennessee, with primary offices in Noxville and Nashville. The company operates in 4 segments: construction casting, service & repair, equipment sales, and construction & fabrication. The iron construction casting segment includes manhole frames, grates, catch basins, and valve boxes. The service & repair segment offers pump & rotating equipment repairs, air compressor services, CNC machining, and more. Equipment sales include pumping, air compressor, and industrial supply. Construction & fabrication includes fire protection, industrial fabrication, and electrical systems.
-
-
-
-
-
Pacific Bay Equipment - Formerly Hosty Pacific
Inline Check Valves
Distributor Overview
Pacific Bay Equipment was founded in 1987 in Modesto, California, where it is still headquartered today. The company serves agriculture, marine, manufacturing, waste management, and other industries as a distributor of cleaning, pressure washing, and related machinery and equipment. The company’s product segments include both machines and other equipment. Machines include floor scrubbing machines, sprayers, steam cleaners, and generators. Other equipment includes detergent, parts, and accessories. In addition to new equipment, the company also offers used equipment, repair, rentals, and trade-ins.
-
-
-
-
-
Koehler Rubber & Supply Co.
Inline Check Valves
Distributor Overview
Koehler Rubber & Supply Co. (Koehler) was founded in 1917 and operates out of Independence, Ohio. Koehler is a distributor for specialty fluid application products. Product offerings include spray finishing equipment, fluid pumping and handling, lubrication, hoses, sealants, adhesives, meter mix, dispense systems, spray systems, hydraulic & pneumatic equipment such as adapters and fittings, and measuring devices such as gauges and thermometers. Koehler also offers value-added services such as system design, service & repair, maintenance training, operator training, and efficiency analysis.
-
-
-
-
-
Modern Fluid Power, Inc.
Inline Check Valves
Distributor Overview
Modern Fluid Power Inc (MFP) was established in 1970 on the outskirts of Blanchester, Ohio. Modern Fluid Power is a distributor for specialized industrial equipment. Among MFP’s product lines are actuator parts, actuators, and actuator components, liquid levels, flow sights, thermometers, sight plugs, pressure gauges, & pressure switches, hydraulic cylinders, tube fittings, valves, hydraulic accessories, pipe fittings, pipe line strainers, backflow preventers, water gauges, directional control air valves, filters, regulators, lubricators, air cylinders, and ball, safety, relief, butterfly, solenoid, check, needle, gate, & globe valves.
-
-
-
-
-
AB Industrial Equipment Co.
Inline Check Valves
Distributor Overview
AB Industrial Equipment Company (AB Industrial) is headquartered in West Chester, Pennsylvania. AB Industrial distributes and services pumps, seals, and related products. Pump categories include varieties such as centrifugal, vertical, slurry, mag-drive, sanitary, and positive displacement pumps. Seals offerings include component seals, cartridge seals, face materials, elastomers, as well as electric motors. Strainers and valves include basket strainers, auto-cleaning, non-metallic, plug valves, relief valves, and triple duty valves among other offering categories.
-
-
-
-
-
Springer Pumps, LLC
Inline Check Valves
Distributor Overview
Springer Pumps, LLC was established in 16 in Eastern Pennsylvania and isa distributor for fluid handling solutions for the food & beverage, CPI, personal care, utility, refining, power generation and industrial wastewater markets in the Northeast and Mid-Atlantic regions of the US. Springer Pumps specializes in pumps, mixers, product recovery systems, and tank cleaning components including diaphragms, metering, mixers, sumps, and accessories. Springer Pumps also offers aftermarket replacement parts, kits, mechanical seals, mixer parts, and heat exchanger parts.
-
-
Inline Check Valve Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Harwood Engineering Co., Inc. |
6.7%
|
| 2 | TSI Flow Products |
6.7%
|
| 3 | Ningbo Doway M&E Co.,Ltd |
3.3%
|
| 4 | Tianjin Fortis Valve Co., Ltd. |
3.3%
|
| 5 | Sedelon valve Co. Ltd. |
3.3%
|
| 6 | AF Hydro |
3.3%
|
| 7 | GL Sciences Inc |
3.3%
|
| 8 | NTGD Valve (China) Co. LTD |
3.3%
|
| 9 | Longda |
3.3%
|
| 10 | Trausch Dynamics |
3.3%
|
Derivation Method
The ranking is calculated based on the click share within the inline check valve page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Nordson Corporation: 7,331
- NACHI-FUJIKOSHI CORP.: 7,205
- Nihon Pisco Co., Ltd.: 520
Newly Established Company
- CNC Flow Control: 2017 (7 years ago)
- Tube Clamps India Pvt. Ltd.: 2016 (8 years ago)
- AF Hydro: 2016 (8 years ago)
Company with a History
- Bonney Forge Corporation: 1876 (148 years ago)
- Stäubli International AG.: 1892 (132 years ago)
- The Specialty Mfg. Co.: 1900 (124 years ago)
Inline Check Valve Manufacturers in United States
*Including some distributors, etc.
- Harwood Engineering Co., Inc.
- Flomatic(R) Corporation
- Warren Valve
- U.S. Valve
- Powell Valves
- Trausch Dynamics
- NP Medical
- TSI Flow Products
- Nordson Corporation
- Cash Acme
- Bonney Forge Corporation
- Entegris
- NIBCO INC.
- Anchor Fluid Power
- Conval
- Kennedy Valve
- Western Enterprises
- Superior Products, Inc.
- Kitz Corp. of America
- Flight Works, Inc.
- The Briggs Company
- TSI Technologies
- Viega USA
- Carlisle Fluid Technologies
- Rola-Chem Corp.
- Beswick Engineering Co., Inc.
- Arcadian Services
- Aero Space Controls Corp.
- Hayward Flow Control
- Ohio Medical LLC
- Clippard
- Air Logic Division of Knapp Mfg., Inc.
- Schutte & Koerting
- SUPERLOK USA
- Aqua Environment Co., Inc.
- HYDAC Technology Corporation
- International Polymer Solutions, (iPolymer)
- SSP Fittings Corp.
- DFT Inc.
- ASC Engineered Solutions, LLC
- Swagelok
- O'Keefe Controls Co.
- Check All Valve Manufacturing Co.
- Midland Industries
- pdblowers, Inc.
- CNC Flow Control
- The Specialty Mfg. Co.
- East Bay Distributors Inc.
- Rainmaker Pump Stations
- Western States Hardware
- Ray Murray, Inc.
- Steel & O'Brien Manufacturing
- Becker & Associates, Inc.
- Sterlco Sterling Authorized Dist. - M & M Control
- Seal Fast, Inc.
- Kinnear Specialties
- Filtration Corp. of America
- Doering Company
- G.A. Murdock, Inc.
- Industrial Specialties Mfg., Inc.
- MAXPRO Technologies, Inc.
- ARI Valve Corp.
- Metraflex Co.
- Asahi/America, Inc.
- TVI Valves
- RED-WHITE VALVE CORP.
- Smart Products USA, Inc.
- Ohio Pipe, Valve & Fittings, Inc.
- Maxpro South, Inc.
- Bailey Motor Equipment Co.
- Reasontek Corp.
- Oil-Air Products, LLC.
- World Wide Metric, Inc.
- Sutton-Garten Co.
- Compressed Air Systems, Inc.
- Circle Valve Technologies Inc.
Global Distribution of Inline Check Valve Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
76 | 73.1% |
China
|
6 | 5.8% |
|
India
|
6 | 5.8% |
Japan
|
5 | 4.8% |
United Kingdom
|
3 | 2.9% |
Canada
|
3 | 2.9% |
Taiwan
|
2 | 1.9% |
Switzerland
|
1 | 1.0% |
Germany
|
1 | 1.0% |
Singapore
|
1 | 1.0% |
