3 Insulating Base Manufacturers in 2024
This section provides an overview for insulating bases as well as their applications and principles. Also, please take a look at the list of 3 insulating base manufacturers and their company rankings. Here are the top-ranked insulating base companies as of April, 2024: 1.Elpro International Limited, 2.Radiant Enterprises.
Table of Contents
What Is an Insulating Base?
An Insulating Base is a table base used to ensure the insulation of electrical equipment.
The table is not a table, but rather a part that is attached under the legs of the table. If the floor is made of metal such as grating, electricity will flow through the floor, affecting other equipment and, in the worst case, leading not only to equipment damage but also to fire or electric shock.
The use of an Insulating Base is to avoid such accidents.
Uses of Insulating Base
Insulating Bases are used to support bus bars, which need to be insulated, and to mount equipment such as control panels, distribution boards, and rectifier panels.
Insulating Bases are fixed to the wall, but when installed on the ground, it is safer to raise them slightly off the ground by attaching an Insulating Base stand to the bottom of the Insulating Base.
On the other hand, the Insulating Base cannot be used in an exposed position outdoors, where it may get wet in the rain, due to its nature.
Principle of Insulating Base
In the industrial world, accidents unfortunately occur despite efforts to eliminate them, and electric shock is one of the most likely to occur.
Of course, there are cases in which accidents are caused by the carelessness of the user, but they are also rare due to design errors or inadequate safety equipment. Electrical accidents are not limited to electric shock, but can also cause fires, short circuits, and other accidents that result in high voltages being applied to other equipment, which can cause damage.
Therefore, it is necessary to pay close attention to safety when using electricity. From this accident prevention point of view as well, the installation of insulating support base stands is an important device for ensuring safety.
An Insulating Base is made of polypropylene or other highly insulating material, which provides a high level of insulation. They can be installed simply by tightening with screws, so they are easy to use and can be used simply by drilling screw holes. Since the insulating support bases can be connected together, the height can be adjusted.
List of 3 Insulating Base Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- India
- Japan
-
-
-
Elpro International Limited
Insulating Base
Manufacturer Overview
Elpro International Limited is a manufacturer of surge arresters and zinc oxide discs with GE technology, incorporated in 1962 and headquartered in Mumbai, India. The company specializes in the design and production of high-voltage arresters and low-voltage metal oxide varistors. It also offers surge protection devices for solar power, wind power, LED street lighting, railway signaling, and more. The company fully complies with the European Union RoHS directive and exports products to over 50 countries worldwide. It caters to diverse sectors, including power generation and distribution, railways, telecommunications, solar energy, and wind energy.
-
-
-
-
-
Radiant Enterprises
Insulating Base
Manufacturer Overview
Radiant Enterprises is a manufacturer and exporter of electrical insulation products, established in 2006 and headquartered in Gujarat, India. The company's product line consists of electrical bushing for transformers, windmills, and railways, along with poly concrete insulators, distribution line fuse cutouts, and polymeric insulators. It also offers adhesives and sealants, epoxy resin, surge disconnectors, and metal parts. The company is ISO 9001:2008-certified and serves a wide range of industries, including electrical, industrial automation, railways, and manufacturing. It exports to various countries and regions, including the United States, Europe, Mexico, and China.
-
-
-
-
-
SHINOHARA ELECTRIC Co. LTD
Insulating Supporter
Company Overview
Shinohara Electric Co.,Ltd., headquartered in Osaka, Japan is a manufacturer and distributor of electrical and mechanical parts for distribution boards and control panels founded in 1961. The company’s product portfolio includes ventilating louvers, heaters, window frames, earthing products, and insulating & metal supporters. The company also supplies various gas detectors in Japan including VOC detectors manufactured by Honeywell Group. They have completed ISO9001, ISO14001 and JISQ 9100 certifications to allow their products to be used for aerospace, railway, data centers, and household applications.
-
-
Insulating Base Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Elpro International Limited |
50.0%
|
| 2 | Radiant Enterprises |
50.0%
|
Derivation Method
The ranking is calculated based on the click share within the insulating base page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- SHINOHARA ELECTRIC Co. LTD: 185
- Radiant Enterprises: 35
Newly Established Company
- Radiant Enterprises: 2006 (18 years ago)
- Elpro International Limited: 1962 (62 years ago)
- SHINOHARA ELECTRIC Co. LTD: 1961 (63 years ago)
Company with a History
- SHINOHARA ELECTRIC Co. LTD: 1961 (63 years ago)
- Elpro International Limited: 1962 (62 years ago)
- Radiant Enterprises: 2006 (18 years ago)
Global Distribution of Insulating Base Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
India
|
2 | 66.7% |
Japan
|
1 | 33.3% |
