9 Double Face Hammer Manufacturers in 2024
This section provides an overview for double face hammers as well as their applications and principles. Also, please take a look at the list of 9 double face hammer manufacturers and their company rankings. Here are the top-ranked double face hammer companies as of April, 2024: 1.AVEN Safety Tools.
Table of Contents
What Is a Double-face Hammer?
A hammer is a general term for a tool that strikes an object and consists of a metal striking portion (head) and a hand-holding portion (handle).
A double-face hammer is a type of hammer with two striking surfaces.
The striking surface of a double-face hammer is flat on one side and curved with a slight bulge on the other side. There are different types of double-face hammers depending on the shape of the head, such as round, square, and octagonal hammers.
Double-face hammer is mainly used for nailing wood. However, it finds application in various fields, including ironworking, civil engineering, and demolition work.
How to Use Double-Face Hammers
Double-face hammers should be held about 3cm from the tip of the handle. If you hold it too close to the tip, it may fall out of your hand when working. If you hold it closer to the striking part, it will be harder to apply force to the striking surface, and your balance will be impaired.
If the double-face hammers are swung down with arm strength alone, control will be unsteady, and it will be difficult to strike the desired spot. Use the elbow as the fulcrum and strike in a rotating motion.
When using double-face hammers to drive nails, initiating the process with the flat side is advisable. Starting with the curved side from the outset can lead to slippage and instability. Begin by using the flat side to drive the nails approximately three-quarters of the way in. After that, use the curved side to finish the nailing, so that the surface of the wood is less likely to be marked by the hammering surface and can be finished neatly.
How to Select Double-Face Hammers
Double-face hammers come in various head sizes, weights, and shapes. It is important to select double-face hammers that are appropriate for the situation in which it will be used, such as nailing into wood, which requires delicate blows, or ironworking or civil engineering work, which requires powerful blows.
The standard weight of typical double-face hammers is 13 oz, but they are available in various sizes from 5 oz to 1.25 lb. The weight of the hammer, to some extent, determines the suitable size for the length of the nail to be nailed. Nailing is still possible with a hammer that is not the right size, but the ease of nailing will differ, so the size should be selected according to the length of the nail.
The most common shape of the head of double-face hammers is round, but an octagonal head is suitable for nailing work in a narrow space because the side of the octagonal head allows horizontal hammering. It is advisable to choose the shape in consideration of the working place and environment.
The handles of double-face hammers are often made of wood, but some are made of polypropylene or fiberglass. Some are also available with non-slip rubber grips. It is best to choose one that is easy to work with depending on the situation in which it is used.
List of 9 Double Face Hammer Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
-
-
-
AVEN Safety Tools
Double Face Hammers
Manufacturer Overview
AVEN Safety Tools, established in 1983 and based in Ann Arbor, Michigan, USA, is a manufacturer of comprehensive safety tools and equipment designed for use in hazardous environments. The product varieties encompass non-sparking tools, antimagnetic tools, and insulated tools, all meticulously crafted to ensure safety and prevent sparks or magnetic interference in potentially explosive settings. These tools offer the benefit of reducing the risk of accidents and fires in industries like oil and gas, petrochemicals, and mining and are of optimal-quality, stable tools that comply with rigorous ISO, CE safety standards.
-
-
-
-
-
Ampco Safety Tools
Double Face Hammers
Manufacturer Overview
Ampco Safety Tools, founded in Garland, TX in 1914 is a manufacturer of Non-Magnetic Hand Tools and Corrosion Resistant Hand Tools. The company's product portfolio includes Non-Sparking Hand Tools, Universal Joints, Valve Wheel Hooks, Pipe Cutters and Barrel Hooks. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company provides services such as Product Selection Guidance, Engineering Support, and Custom Manufacturing.
-
-
-
-
-
Foxy MFG Inc
Double Face Hammers
Manufacturer Overview
Foxy MFG Inc., founded in 1945 and located in Poplar Bluff, United States of America, is a manufacturer of hand tools and handles. The company produces brooms and brushes, replacement handles, axes and mauls, blades and weed cutters, and post drivers and pullers. It also crafts loppers and shears, roofing tear-off tools, shovels and spades, water meter keys, and concrete tools. Its products serve the following industries, which are household and DIY, maintenance and repair, and gardening and landscaping.
-
-
-
-
-
TERRE.
Double Face Hammers
Company Overview
TERRE, established in 1946, is headquartered in Texas, USA and is a provider of cost-effective replacement parts, general-purpose mechanical motion parts, and outdoor power equipment. The centrality of product and service quality underpins all their endeavors. TERRE™ is a supplier headquartered in the United States that specializes in providing authentic OEM replacement and general-purpose mechanical motion components, finished goods, and solutions to a global customer base. These customers include retailers, manufacturers, dealers or distributors, and individuals seeking solutions for various applications such as home improvement, agriculture, lawn and garden maintenance, and other related areas.
-
-
-
-
-
-
-
CS Unitec, Inc.
Double Face Hammers
Manufacturer Overview
Unitec Power Tools (Unitec) was founded in 1990 and operates out of Norwalk Connecticut and Deer Park, Texas. The company is a developer and producer of tools for metalworking, concrete, masonry, petrochemical, hazardous environments and Ex Zones, underwater, and mining. The company developed the first air-powered band saw in 1991. The company's tool types include cutting tools, surface preparation tools, dust collection systems, safety tools, and various specialty tools. The company offers support in both English and Spanish.
-
-
-
-
-
Klein Tools, Inc.
Double Face Hammers
Company Overview
Klein Tools is a fifth-generation family-run producer of hand tools founded in 187 and headquartered in Lincolnshire, Illinois. Klein Tools sells worldwide directly and through distributors. Klein Tools has a family of companies under its brand including Alco, Civitella, Mumme Tools, Tulmex, and Wattmaster. Klein Tools serves several industries including construction, HVAC/R, plumbing, telecom, municipal, and industrial. Some of the tools Klein Tools produces include non-contact voltage tester bens, multi-bit screwdrivers, digital circuit breaker finders, advanced circuit tracer kits, and multi-bit electronics screwdrivers.
-
-
-
-
-
Williams
Double Face Hammers
Distributor Overview
Williams was founded in 1882, is a supplier of tools and equipment for industrial professionals based in the United States. The company has been serving many industries since its inception. Their product range includes wrenches, sockets, and torque tools, among others, catering to professionals in automotive, aerospace, and industrial sectors. Their industrial tools are designed by knowledgeable professionals with years of industry experience. With a strong emphasis on precision and craftsmanship, their products continues to be the preferred choice for professionals seeking efficient solutions.
-
-
-
-
-
Menard, Inc.
Double Face Hammers
Distributor Overview
Menards Inc, founded in the year 1958, based in Wisconsin, United States, is a supplier of high-quality, name-brand merchandise tools, materials, and home supplies. Their product portfolio includes home appliances, building materials, electrical, grocery, tools, and gift cards. The products are used in home applications. The company has over 300 stores listed under different categories for home improvements with top-quality, services, special offers, and great savings which are listed on the online portal.
-
-
Double Face Hammer Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | AVEN Safety Tools |
100.0%
|
Derivation Method
The ranking is calculated based on the click share within the double face hammer page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
- CS Unitec, Inc.: 1990 (34 years ago)
- Foxy MFG Inc: 1945 (79 years ago)
- Ampco Safety Tools: 1922 (102 years ago)
Company with a History
- Williams: 1882 (142 years ago)
- Ampco Safety Tools: 1922 (102 years ago)
- Foxy MFG Inc: 1945 (79 years ago)
Double Face Hammer Manufacturers in United States
*Including some distributors, etc.
Global Distribution of Double Face Hammer Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
5 | 100.0% |
